/** @file
 *  @brief MAVLink comm protocol generated from ardupilotmega.xml
 *  @see http://mavlink.org
 */
#pragma once
#ifndef MAVLINK_ARDUPILOTMEGA_H
#define MAVLINK_ARDUPILOTMEGA_H

#ifndef MAVLINK_H
    #error Wrong include order: MAVLINK_ARDUPILOTMEGA.H MUST NOT BE DIRECTLY USED. Include mavlink.h from the same directory instead or set ALL AND EVERY defines from MAVLINK.H manually accordingly, including the #define MAVLINK_H call.
#endif

#define MAVLINK_ARDUPILOTMEGA_XML_HASH 4302481282755065335

#ifdef __cplusplus
extern "C" {
#endif

// MESSAGE LENGTHS AND CRCS

#ifndef MAVLINK_MESSAGE_LENGTHS
#define MAVLINK_MESSAGE_LENGTHS {}
#endif

#ifndef MAVLINK_MESSAGE_CRCS
#define MAVLINK_MESSAGE_CRCS {{0, 50, 9, 9, 0, 0, 0}, {1, 124, 31, 31, 0, 0, 0}, {2, 137, 12, 12, 0, 0, 0}, {4, 237, 14, 14, 3, 12, 13}, {5, 217, 28, 28, 1, 0, 0}, {6, 104, 3, 3, 0, 0, 0}, {7, 119, 32, 32, 0, 0, 0}, {11, 89, 6, 6, 1, 4, 0}, {20, 214, 20, 20, 3, 2, 3}, {21, 159, 2, 2, 3, 0, 1}, {22, 220, 25, 25, 0, 0, 0}, {23, 168, 23, 23, 3, 4, 5}, {24, 24, 30, 52, 0, 0, 0}, {25, 23, 101, 101, 0, 0, 0}, {26, 170, 22, 24, 0, 0, 0}, {27, 144, 26, 29, 0, 0, 0}, {28, 67, 16, 16, 0, 0, 0}, {29, 115, 14, 16, 0, 0, 0}, {30, 39, 28, 28, 0, 0, 0}, {31, 246, 32, 48, 0, 0, 0}, {32, 185, 28, 28, 0, 0, 0}, {33, 104, 28, 28, 0, 0, 0}, {34, 237, 22, 22, 0, 0, 0}, {35, 244, 22, 22, 0, 0, 0}, {36, 222, 21, 37, 0, 0, 0}, {37, 212, 6, 7, 3, 4, 5}, {38, 9, 6, 7, 3, 4, 5}, {39, 254, 37, 38, 3, 32, 33}, {40, 230, 4, 5, 3, 2, 3}, {41, 28, 4, 4, 3, 2, 3}, {42, 28, 2, 6, 0, 0, 0}, {43, 132, 2, 3, 3, 0, 1}, {44, 221, 4, 5, 3, 2, 3}, {45, 232, 2, 3, 3, 0, 1}, {46, 11, 2, 2, 0, 0, 0}, {47, 153, 3, 4, 3, 0, 1}, {48, 41, 13, 21, 1, 12, 0}, {49, 39, 12, 20, 0, 0, 0}, {50, 78, 37, 37, 3, 18, 19}, {51, 196, 4, 5, 3, 2, 3}, {54, 15, 27, 27, 3, 24, 25}, {55, 3, 25, 25, 0, 0, 0}, {61, 167, 72, 72, 0, 0, 0}, {62, 183, 26, 26, 0, 0, 0}, {63, 119, 181, 181, 0, 0, 0}, {64, 191, 225, 225, 0, 0, 0}, {65, 118, 42, 42, 0, 0, 0}, {66, 148, 6, 6, 3, 2, 3}, {67, 21, 4, 4, 0, 0, 0}, {69, 243, 11, 30, 1, 10, 0}, {70, 124, 18, 38, 3, 16, 17}, {73, 38, 37, 38, 3, 32, 33}, {74, 20, 20, 20, 0, 0, 0}, {75, 158, 35, 35, 3, 30, 31}, {76, 152, 33, 33, 3, 30, 31}, {77, 143, 3, 10, 3, 8, 9}, {81, 106, 22, 22, 0, 0, 0}, {82, 49, 39, 39, 3, 36, 37}, {83, 22, 37, 37, 0, 0, 0}, {84, 143, 53, 53, 3, 50, 51}, {85, 140, 51, 51, 0, 0, 0}, {86, 5, 53, 53, 3, 50, 51}, {87, 150, 51, 51, 0, 0, 0}, {89, 231, 28, 28, 0, 0, 0}, {90, 183, 56, 56, 0, 0, 0}, {91, 63, 42, 42, 0, 0, 0}, {92, 54, 33, 33, 0, 0, 0}, {93, 47, 81, 81, 0, 0, 0}, {100, 175, 26, 34, 0, 0, 0}, {101, 102, 32, 117, 0, 0, 0}, {102, 158, 32, 117, 0, 0, 0}, {103, 208, 20, 57, 0, 0, 0}, {104, 56, 32, 116, 0, 0, 0}, {105, 93, 62, 63, 0, 0, 0}, {106, 138, 44, 44, 0, 0, 0}, {107, 108, 64, 65, 0, 0, 0}, {108, 32, 84, 92, 0, 0, 0}, {109, 185, 9, 9, 0, 0, 0}, {110, 84, 254, 254, 3, 1, 2}, {111, 34, 16, 16, 0, 0, 0}, {112, 174, 12, 12, 0, 0, 0}, {113, 124, 36, 39, 0, 0, 0}, {114, 237, 44, 44, 0, 0, 0}, {115, 4, 64, 64, 0, 0, 0}, {116, 76, 22, 24, 0, 0, 0}, {117, 128, 6, 6, 3, 4, 5}, {118, 56, 14, 14, 0, 0, 0}, {119, 116, 12, 12, 3, 10, 11}, {120, 134, 97, 97, 0, 0, 0}, {121, 237, 2, 2, 3, 0, 1}, {122, 203, 2, 2, 3, 0, 1}, {123, 250, 113, 113, 3, 0, 1}, {124, 87, 35, 57, 0, 0, 0}, {125, 203, 6, 6, 0, 0, 0}, {126, 220, 79, 79, 0, 0, 0}, {127, 25, 35, 35, 0, 0, 0}, {128, 226, 35, 35, 0, 0, 0}, {129, 46, 22, 24, 0, 0, 0}, {130, 29, 13, 13, 0, 0, 0}, {131, 223, 255, 255, 0, 0, 0}, {132, 85, 14, 39, 0, 0, 0}, {133, 6, 18, 18, 0, 0, 0}, {134, 229, 43, 43, 0, 0, 0}, {135, 203, 8, 8, 0, 0, 0}, {136, 1, 22, 22, 0, 0, 0}, {137, 195, 14, 16, 0, 0, 0}, {138, 109, 36, 120, 0, 0, 0}, {139, 168, 43, 43, 3, 41, 42}, {140, 181, 41, 41, 0, 0, 0}, {141, 47, 32, 32, 0, 0, 0}, {142, 72, 243, 243, 0, 0, 0}, {143, 131, 14, 16, 0, 0, 0}, {144, 127, 93, 93, 0, 0, 0}, {146, 103, 100, 100, 0, 0, 0}, {147, 154, 36, 54, 0, 0, 0}, {148, 178, 60, 78, 0, 0, 0}, {149, 200, 30, 60, 0, 0, 0}, {150, 134, 42, 42, 0, 0, 0}, {151, 219, 8, 8, 3, 6, 7}, {152, 208, 4, 8, 0, 0, 0}, {153, 188, 12, 12, 0, 0, 0}, {154, 84, 15, 15, 3, 6, 7}, {155, 22, 13, 13, 3, 4, 5}, {156, 19, 6, 6, 3, 0, 1}, {157, 21, 15, 15, 3, 12, 13}, {158, 134, 14, 15, 3, 12, 13}, {160, 78, 12, 12, 3, 8, 9}, {161, 68, 3, 3, 3, 0, 1}, {162, 189, 8, 9, 0, 0, 0}, {163, 127, 28, 28, 0, 0, 0}, {164, 154, 44, 44, 0, 0, 0}, {165, 21, 3, 3, 0, 0, 0}, {166, 21, 9, 9, 0, 0, 0}, {167, 144, 22, 22, 0, 0, 0}, {168, 1, 12, 12, 0, 0, 0}, {169, 234, 18, 18, 0, 0, 0}, {170, 73, 34, 34, 0, 0, 0}, {171, 181, 66, 66, 0, 0, 0}, {172, 22, 98, 98, 0, 0, 0}, {173, 83, 8, 8, 0, 0, 0}, {174, 167, 48, 48, 0, 0, 0}, {175, 138, 19, 19, 3, 14, 15}, {176, 234, 3, 3, 3, 0, 1}, {177, 240, 20, 20, 0, 0, 0}, {178, 47, 24, 24, 0, 0, 0}, {179, 189, 29, 29, 1, 26, 0}, {180, 52, 45, 47, 1, 42, 0}, {181, 174, 4, 4, 0, 0, 0}, {182, 229, 40, 40, 0, 0, 0}, {183, 85, 2, 2, 3, 0, 1}, {184, 159, 206, 206, 3, 4, 5}, {185, 186, 7, 7, 3, 4, 5}, {186, 72, 29, 29, 3, 0, 1}, {191, 92, 27, 27, 0, 0, 0}, {192, 36, 44, 54, 0, 0, 0}, {193, 71, 22, 26, 0, 0, 0}, {194, 98, 25, 33, 0, 0, 0}, {195, 120, 37, 37, 0, 0, 0}, {200, 134, 42, 42, 3, 40, 41}, {201, 205, 14, 14, 3, 12, 13}, {214, 69, 8, 8, 3, 6, 7}, {215, 101, 3, 3, 0, 0, 0}, {216, 50, 3, 3, 3, 0, 1}, {217, 202, 6, 6, 0, 0, 0}, {218, 17, 7, 7, 3, 0, 1}, {219, 162, 2, 2, 0, 0, 0}, {225, 208, 65, 73, 0, 0, 0}, {226, 207, 8, 8, 0, 0, 0}, {230, 163, 42, 42, 0, 0, 0}, {231, 105, 40, 40, 0, 0, 0}, {232, 151, 63, 65, 0, 0, 0}, {233, 35, 182, 182, 0, 0, 0}, {234, 150, 40, 40, 0, 0, 0}, {235, 179, 42, 42, 0, 0, 0}, {241, 90, 32, 32, 0, 0, 0}, {242, 104, 52, 60, 0, 0, 0}, {243, 85, 53, 61, 1, 52, 0}, {244, 95, 6, 6, 0, 0, 0}, {245, 130, 2, 2, 0, 0, 0}, {246, 184, 38, 38, 0, 0, 0}, {247, 81, 19, 19, 0, 0, 0}, {248, 8, 254, 254, 3, 3, 4}, {249, 204, 36, 36, 0, 0, 0}, {250, 49, 30, 30, 0, 0, 0}, {251, 170, 18, 18, 0, 0, 0}, {252, 44, 18, 18, 0, 0, 0}, {253, 83, 51, 54, 0, 0, 0}, {254, 46, 9, 9, 0, 0, 0}, {256, 71, 42, 42, 3, 8, 9}, {257, 131, 9, 9, 0, 0, 0}, {258, 187, 32, 232, 3, 0, 1}, {259, 92, 235, 236, 0, 0, 0}, {260, 146, 5, 13, 0, 0, 0}, {261, 179, 27, 60, 0, 0, 0}, {262, 12, 18, 22, 0, 0, 0}, {263, 133, 255, 255, 0, 0, 0}, {264, 49, 28, 28, 0, 0, 0}, {265, 26, 16, 20, 0, 0, 0}, {266, 193, 255, 255, 3, 2, 3}, {267, 35, 255, 255, 3, 2, 3}, {268, 14, 4, 4, 3, 2, 3}, {269, 109, 213, 214, 0, 0, 0}, {270, 59, 19, 19, 0, 0, 0}, {271, 22, 52, 52, 0, 0, 0}, {275, 126, 31, 31, 0, 0, 0}, {276, 18, 49, 49, 0, 0, 0}, {277, 62, 30, 30, 0, 0, 0}, {280, 70, 33, 33, 0, 0, 0}, {281, 48, 13, 13, 0, 0, 0}, {282, 123, 35, 35, 3, 32, 33}, {283, 74, 144, 145, 0, 0, 0}, {284, 99, 32, 32, 3, 30, 31}, {285, 137, 40, 49, 3, 38, 39}, {286, 210, 53, 57, 3, 50, 51}, {287, 1, 23, 23, 3, 20, 21}, {288, 20, 23, 23, 3, 20, 21}, {299, 19, 96, 96, 0, 0, 0}, {301, 243, 58, 58, 0, 0, 0}, {310, 28, 17, 17, 0, 0, 0}, {311, 95, 116, 116, 0, 0, 0}, {320, 243, 20, 20, 3, 2, 3}, {321, 88, 2, 2, 3, 0, 1}, {322, 243, 149, 149, 0, 0, 0}, {323, 78, 147, 147, 3, 0, 1}, {324, 132, 146, 146, 0, 0, 0}, {330, 23, 158, 167, 0, 0, 0}, {331, 91, 230, 233, 0, 0, 0}, {332, 236, 239, 239, 0, 0, 0}, {333, 231, 109, 109, 0, 0, 0}, {335, 225, 24, 24, 0, 0, 0}, {339, 199, 5, 5, 0, 0, 0}, {340, 99, 70, 70, 0, 0, 0}, {350, 232, 20, 252, 0, 0, 0}, {370, 75, 87, 109, 0, 0, 0}, {373, 117, 42, 42, 0, 0, 0}, {375, 251, 140, 140, 0, 0, 0}, {376, 199, 8, 8, 0, 0, 0}, {385, 147, 133, 133, 3, 2, 3}, {386, 132, 16, 16, 3, 4, 5}, {387, 4, 72, 72, 3, 4, 5}, {388, 8, 37, 37, 3, 32, 33}, {9000, 113, 137, 137, 0, 0, 0}, {9005, 117, 34, 34, 0, 0, 0}, {10001, 209, 20, 20, 0, 0, 0}, {10002, 186, 41, 41, 0, 0, 0}, {10003, 4, 1, 1, 0, 0, 0}, {10004, 133, 9, 9, 0, 0, 0}, {10005, 103, 9, 9, 0, 0, 0}, {10006, 193, 4, 4, 0, 0, 0}, {10007, 71, 17, 17, 0, 0, 0}, {10008, 240, 14, 14, 0, 0, 0}, {10151, 195, 85, 85, 0, 0, 0}, {11000, 134, 51, 52, 3, 4, 5}, {11001, 15, 135, 136, 0, 0, 0}, {11002, 234, 179, 180, 3, 4, 5}, {11003, 64, 5, 5, 0, 0, 0}, {11004, 11, 232, 232, 3, 8, 9}, {11005, 93, 230, 230, 0, 0, 0}, {11010, 46, 49, 49, 0, 0, 0}, {11011, 106, 44, 44, 0, 0, 0}, {11020, 205, 16, 16, 0, 0, 0}, {11030, 144, 44, 44, 0, 0, 0}, {11031, 133, 44, 44, 0, 0, 0}, {11032, 85, 44, 44, 0, 0, 0}, {11033, 195, 37, 37, 3, 16, 17}, {11034, 79, 5, 5, 0, 0, 0}, {11035, 128, 8, 8, 3, 4, 5}, {11036, 177, 34, 34, 0, 0, 0}, {11037, 130, 28, 28, 0, 0, 0}, {11038, 47, 38, 38, 0, 0, 0}, {11039, 142, 9, 9, 0, 0, 0}, {11040, 132, 44, 44, 0, 0, 0}, {11041, 208, 44, 44, 0, 0, 0}, {11042, 201, 44, 44, 0, 0, 0}, {11043, 193, 44, 44, 0, 0, 0}, {11044, 189, 44, 44, 0, 0, 0}, {12900, 114, 44, 44, 3, 0, 1}, {12901, 254, 59, 59, 3, 30, 31}, {12902, 140, 53, 53, 3, 4, 5}, {12903, 249, 46, 46, 3, 0, 1}, {12904, 77, 54, 54, 3, 28, 29}, {12905, 49, 43, 43, 3, 0, 1}, {12915, 94, 249, 249, 3, 0, 1}, {12918, 139, 51, 51, 0, 0, 0}, {12919, 7, 18, 18, 3, 16, 17}, {12920, 20, 5, 5, 0, 0, 0}, {42000, 227, 1, 1, 0, 0, 0}, {42001, 239, 46, 46, 0, 0, 0}, {50001, 246, 32, 32, 0, 0, 0}, {50002, 181, 246, 246, 0, 0, 0}, {50003, 62, 19, 19, 0, 0, 0}, {50004, 240, 10, 10, 3, 8, 9}, {50005, 152, 6, 6, 3, 4, 5}, {52000, 13, 100, 100, 0, 0, 0}, {52001, 239, 1, 1, 0, 0, 0}}
#endif

#include "../protocol.h"

#define MAVLINK_ENABLED_ARDUPILOTMEGA

// ENUM DEFINITIONS


/** @brief  */
#ifndef HAVE_ENUM_ACCELCAL_VEHICLE_POS
#define HAVE_ENUM_ACCELCAL_VEHICLE_POS
typedef enum ACCELCAL_VEHICLE_POS
{
   ACCELCAL_VEHICLE_POS_LEVEL=1, /*  | */
   ACCELCAL_VEHICLE_POS_LEFT=2, /*  | */
   ACCELCAL_VEHICLE_POS_RIGHT=3, /*  | */
   ACCELCAL_VEHICLE_POS_NOSEDOWN=4, /*  | */
   ACCELCAL_VEHICLE_POS_NOSEUP=5, /*  | */
   ACCELCAL_VEHICLE_POS_BACK=6, /*  | */
   ACCELCAL_VEHICLE_POS_SUCCESS=16777215, /*  | */
   ACCELCAL_VEHICLE_POS_FAILED=16777216, /*  | */
   ACCELCAL_VEHICLE_POS_ENUM_END=16777217, /*  | */
} ACCELCAL_VEHICLE_POS;
#endif

/** @brief  */
#ifndef HAVE_ENUM_HEADING_TYPE
#define HAVE_ENUM_HEADING_TYPE
typedef enum HEADING_TYPE
{
   HEADING_TYPE_COURSE_OVER_GROUND=0, /*  | */
   HEADING_TYPE_HEADING=1, /*  | */
   HEADING_TYPE_ENUM_END=2, /*  | */
} HEADING_TYPE;
#endif

/** @brief Commands to be executed by the MAV. They can be executed on user request, or as part of a mission script. If the action is used in a mission, the parameter mapping to the waypoint/mission message is as follows: Param 1, Param 2, Param 3, Param 4, X: Param 5, Y:Param 6, Z:Param 7. This command list is similar what ARINC 424 is for commercial aircraft: A data format how to interpret waypoint/mission data. NaN and INT32_MAX may be used in float/integer params (respectively) to indicate optional/default values (e.g. to use the component's current yaw or latitude rather than a specific value). See https://mavlink.io/en/guide/xml_schema.html#MAV_CMD for information about the structure of the MAV_CMD entries */
#ifndef HAVE_ENUM_MAV_CMD
#define HAVE_ENUM_MAV_CMD
typedef enum MAV_CMD
{
   MAV_CMD_NAV_WAYPOINT=16, /* Navigate to waypoint. |Hold time. (ignored by fixed wing, time to stay at waypoint for rotary wing)| Acceptance radius (if the sphere with this radius is hit, the waypoint counts as reached)| 0 to pass through the WP, if > 0 radius to pass by WP. Positive value for clockwise orbit, negative value for counter-clockwise orbit. Allows trajectory control.| Desired yaw angle at waypoint (rotary wing). NaN to use the current system yaw heading mode (e.g. yaw towards next waypoint, yaw to home, etc.).| Latitude| Longitude| Altitude|  */
   MAV_CMD_NAV_LOITER_UNLIM=17, /* Loiter around this waypoint an unlimited amount of time |Empty| Empty| Loiter radius around waypoint for forward-only moving vehicles (not multicopters). If positive loiter clockwise, else counter-clockwise| Desired yaw angle. NaN to use the current system yaw heading mode (e.g. yaw towards next waypoint, yaw to home, etc.).| Latitude| Longitude| Altitude|  */
   MAV_CMD_NAV_LOITER_TURNS=18, /* Loiter around this waypoint for X turns |Number of turns.| Empty| Radius around waypoint. If positive loiter clockwise, else counter-clockwise| Forward moving aircraft this sets exit xtrack location: 0 for center of loiter wp, 1 for exit location. Else, this is desired yaw angle. NaN to use the current system yaw heading mode (e.g. yaw towards next waypoint, yaw to home, etc.).| Latitude| Longitude| Altitude|  */
   MAV_CMD_NAV_LOITER_TIME=19, /* Loiter around this waypoint for X seconds |Loiter time.| Empty| Radius around waypoint. If positive loiter clockwise, else counter-clockwise.| Forward moving aircraft this sets exit xtrack location: 0 for center of loiter wp, 1 for exit location. Else, this is desired yaw angle.  NaN to use the current system yaw heading mode (e.g. yaw towards next waypoint, yaw to home, etc.).| Latitude| Longitude| Altitude|  */
   MAV_CMD_NAV_RETURN_TO_LAUNCH=20, /* Return to launch location |Empty| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_NAV_LAND=21, /* Land at location. |Minimum target altitude if landing is aborted (0 = undefined/use system default).| Precision land mode.| Empty.| Desired yaw angle. NaN to use the current system yaw heading mode (e.g. yaw towards next waypoint, yaw to home, etc.).| Latitude.| Longitude.| Landing altitude (ground level in current frame).|  */
   MAV_CMD_NAV_TAKEOFF=22, /* Takeoff from ground / hand. Vehicles that support multiple takeoff modes (e.g. VTOL quadplane) should take off using the currently configured mode. |Minimum pitch (if airspeed sensor present), desired pitch without sensor| Empty| Empty| Yaw angle (if magnetometer present), ignored without magnetometer. NaN to use the current system yaw heading mode (e.g. yaw towards next waypoint, yaw to home, etc.).| Latitude| Longitude| Altitude|  */
   MAV_CMD_NAV_LAND_LOCAL=23, /* Land at local position (local frame only) |Landing target number (if available)| Maximum accepted offset from desired landing position - computed magnitude from spherical coordinates: d = sqrt(x^2 + y^2 + z^2), which gives the maximum accepted distance between the desired landing position and the position where the vehicle is about to land| Landing descend rate| Desired yaw angle| Y-axis position| X-axis position| Z-axis / ground level position|  */
   MAV_CMD_NAV_TAKEOFF_LOCAL=24, /* Takeoff from local position (local frame only) |Minimum pitch (if airspeed sensor present), desired pitch without sensor| Empty| Takeoff ascend rate| Yaw angle (if magnetometer or another yaw estimation source present), ignored without one of these| Y-axis position| X-axis position| Z-axis position|  */
   MAV_CMD_NAV_FOLLOW=25, /* Vehicle following, i.e. this waypoint represents the position of a moving vehicle |Following logic to use (e.g. loitering or sinusoidal following) - depends on specific autopilot implementation| Ground speed of vehicle to be followed| Radius around waypoint. If positive loiter clockwise, else counter-clockwise| Desired yaw angle.| Latitude| Longitude| Altitude|  */
   MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT=30, /* Continue on the current course and climb/descend to specified altitude.  When the altitude is reached continue to the next command (i.e., don't proceed to the next command until the desired altitude is reached. |Climb or Descend (0 = Neutral, command completes when within 5m of this command's altitude, 1 = Climbing, command completes when at or above this command's altitude, 2 = Descending, command completes when at or below this command's altitude.| Empty| Empty| Empty| Empty| Empty| Desired altitude|  */
   MAV_CMD_NAV_LOITER_TO_ALT=31, /* Begin loiter at the specified Latitude and Longitude.  If Lat=Lon=0, then loiter at the current position.  Don't consider the navigation command complete (don't leave loiter) until the altitude has been reached. Additionally, if the Heading Required parameter is non-zero the aircraft will not leave the loiter until heading toward the next waypoint. |Heading Required (0 = False)| Loiter radius around waypoint for forward-only moving vehicles (not multicopters). If positive loiter clockwise, negative counter-clockwise, 0 means no change to standard loiter.| Empty| Forward moving aircraft this sets exit xtrack location: 0 for center of loiter wp, 1 for exit location| Latitude| Longitude| Altitude|  */
   MAV_CMD_DO_FOLLOW=32, /* Begin following a target |System ID (of the FOLLOW_TARGET beacon). Send 0 to disable follow-me and return to the default position hold mode.| Reserved| Reserved| Altitude mode: 0: Keep current altitude, 1: keep altitude difference to target, 2: go to a fixed altitude above home.| Altitude above home. (used if mode=2)| Reserved| Time to land in which the MAV should go to the default position hold mode after a message RX timeout.|  */
   MAV_CMD_DO_FOLLOW_REPOSITION=33, /* Reposition the MAV after a follow target command has been sent |Camera q1 (where 0 is on the ray from the camera to the tracking device)| Camera q2| Camera q3| Camera q4| altitude offset from target| X offset from target| Y offset from target|  */
   MAV_CMD_NAV_ROI=80, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicle's control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of interest mode.| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z|  */
   MAV_CMD_NAV_PATHPLANNING=81, /* Control autonomous path planning on the MAV. |0: Disable local obstacle avoidance / local path planning (without resetting map), 1: Enable local path planning, 2: Enable and reset local path planning| 0: Disable full path planning (without resetting map), 1: Enable, 2: Enable and reset map/occupancy grid, 3: Enable and reset planned route, but not occupancy grid| Empty| Yaw angle at goal| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal|  */
   MAV_CMD_NAV_SPLINE_WAYPOINT=82, /* Navigate to waypoint using a spline path. |Hold time. (ignored by fixed wing, time to stay at waypoint for rotary wing)| Empty| Empty| Empty| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal|  */
   MAV_CMD_NAV_ALTITUDE_WAIT=83, /* Mission command to wait for an altitude or downwards vertical speed. This is meant for high altitude balloon launches, allowing the aircraft to be idle until either an altitude is reached or a negative vertical speed is reached (indicating early balloon burst). The wiggle time is how often to wiggle the control surfaces to prevent them seizing up. |Altitude.| Descent speed.| How long to wiggle the control surfaces to prevent them seizing up.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_NAV_VTOL_TAKEOFF=84, /* Takeoff from ground using VTOL mode, and transition to forward flight with specified heading. The command should be ignored by vehicles that dont support both VTOL and fixed-wing flight (multicopters, boats,etc.). |Empty| Front transition heading.| Empty| Yaw angle. NaN to use the current system yaw heading mode (e.g. yaw towards next waypoint, yaw to home, etc.).| Latitude| Longitude| Altitude|  */
   MAV_CMD_NAV_VTOL_LAND=85, /* Land using VTOL mode |See NAV_VTOL_LAND_OPTIONS enum| Empty| Approach altitude (with the same reference as the Altitude field). NaN if unspecified.| Yaw angle. NaN to use the current system yaw heading mode (e.g. yaw towards next waypoint, yaw to home, etc.).| Latitude| Longitude| Altitude (ground level)|  */
   MAV_CMD_NAV_GUIDED_ENABLE=92, /* hand control over to an external controller |On / Off (> 0.5f on)| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_NAV_DELAY=93, /* Delay the next navigation command a number of seconds or until a specified time |Delay (-1 to enable time-of-day fields)| hour (24h format, UTC, -1 to ignore)| minute (24h format, UTC, -1 to ignore)| second (24h format, UTC, -1 to ignore)| Empty| Empty| Empty|  */
   MAV_CMD_NAV_PAYLOAD_PLACE=94, /* Descend and place payload. Vehicle moves to specified location, descends until it detects a hanging payload has reached the ground, and then releases the payload. If ground is not detected before the reaching the maximum descent value (param1), the command will complete without releasing the payload. |Maximum distance to descend.| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
   MAV_CMD_NAV_LAST=95, /* NOP - This command is only used to mark the upper limit of the NAV/ACTION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_CONDITION_DELAY=112, /* Delay mission state machine. |Delay| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_CONDITION_CHANGE_ALT=113, /* Ascend/descend to target altitude at specified rate. Delay mission state machine until desired altitude reached. |Descent / Ascend rate.| Empty| Empty| Empty| Empty| Empty| Target Altitude|  */
   MAV_CMD_CONDITION_DISTANCE=114, /* Delay mission state machine until within desired distance of next NAV point. |Distance.| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_CONDITION_YAW=115, /* Reach a certain target angle. |target angle [0-360]. Absolute angles: 0 is north. Relative angle: 0 is initial yaw. Direction set by param3.| angular speed| direction: -1: counter clockwise, 0: shortest direction, 1: clockwise| 0: absolute angle, 1: relative offset| Empty| Empty| Empty|  */
   MAV_CMD_CONDITION_LAST=159, /* NOP - This command is only used to mark the upper limit of the CONDITION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_SET_MODE=176, /* Set system mode. |Mode| Custom mode - this is system specific, please refer to the individual autopilot specifications for details.| Custom sub mode - this is system specific, please refer to the individual autopilot specifications for details.| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_JUMP=177, /* Jump to the desired command in the mission list.  Repeat this action only the specified number of times |Sequence number| Repeat count| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_CHANGE_SPEED=178, /* Change speed and/or throttle set points |Speed type of value set in param2 (such as airspeed, ground speed, and so on)| Speed (-1 indicates no change, -2 indicates return to default vehicle speed)| Throttle (-1 indicates no change, -2 indicates return to default vehicle throttle value)| 0: absolute, 1: relative| Empty| Empty| Empty|  */
   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
   MAV_CMD_DO_SET_PARAMETER=180, /* Set a system parameter.  Caution!  Use of this command requires knowledge of the numeric enumeration value of the parameter. |Parameter number| Parameter value| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_SET_RELAY=181, /* Set a relay to a condition. |Relay instance number.| Setting. (1=on, 0=off, others possible depending on system hardware)| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_REPEAT_RELAY=182, /* Cycle a relay on and off for a desired number of cycles with a desired period. |Relay instance number.| Cycle count.| Cycle time.| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_SET_SERVO=183, /* Set a servo to a desired PWM value. |Servo instance number.| Pulse Width Modulation.| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_REPEAT_SERVO=184, /* Cycle a between its nominal setting and a desired PWM for a desired number of cycles with a desired period. |Servo instance number.| Pulse Width Modulation.| Cycle count.| Cycle time.| Empty| Empty| Empty|  */
   MAV_CMD_DO_FLIGHTTERMINATION=185, /* Terminate flight immediately |Flight termination activated if > 0.5| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_CHANGE_ALTITUDE=186, /* Change altitude set point. |Altitude.| Frame of new altitude.| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_RETURN_PATH_START=188, /* Mission item to specify the start of a failsafe/landing return-path segment (the end of the segment is the next MAV_CMD_DO_LAND_START item).
          A vehicle that is using missions for landing (e.g. in a return mode) will join the mission on the closest path of the return-path segment (instead of MAV_CMD_DO_LAND_START or the nearest waypoint).
          The main use case is to minimize the failsafe flight path in corridor missions, where the inbound/outbound paths are constrained (by geofences) to the same particular path.
          The MAV_CMD_NAV_RETURN_PATH_START would be placed at the start of the return path.
          If a failsafe occurs on the outbound path the vehicle will move to the nearest point on the return path (which is parallel for this kind of mission), effectively turning round and following the shortest path to landing.
          If a failsafe occurs on the inbound path the vehicle is already on the return segment and will continue to landing.
          The Latitude/Longitude/Altitude are optional, and may be set to 0 if not needed.
          If specified, the item defines the waypoint at which the return segment starts.
          If sent using as a command, the vehicle will perform a mission landing (using the land segment if defined) or reject the command if mission landings are not supported, or no mission landing is defined. When used as a command any position information in the command is ignored.
         |Empty| Empty| Empty| Empty| Latitudee. 0: not used.| Longitudee. 0: not used.| Altitudee. 0: not used.|  */
   MAV_CMD_DO_LAND_START=189, /* Mission command to perform a landing. This is used as a marker in a mission to tell the autopilot where a sequence of mission items that represents a landing starts.
	  It may also be sent via a COMMAND_LONG to trigger a landing, in which case the nearest (geographically) landing sequence in the mission will be used.
	  The Latitude/Longitude/Altitude is optional, and may be set to 0 if not needed. If specified then it will be used to help find the closest landing sequence.
	 |Empty| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
   MAV_CMD_DO_RALLY_LAND=190, /* Mission command to perform a landing from a rally point. |Break altitude| Landing speed| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_GO_AROUND=191, /* Mission command to safely abort an autonomous landing. |Altitude| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_REPOSITION=192, /* Reposition the vehicle to a specific WGS84 global position. |Ground speed, less than 0 (-1) for default| Bitmask of option flags.| Loiter radius for planes. Positive values only, direction is controlled by Yaw value. A value of zero or NaN is ignored. | Yaw heading. NaN to use the current system yaw heading mode (e.g. yaw towards next waypoint, yaw to home, etc.). For planes indicates loiter direction (0: clockwise, 1: counter clockwise)| Latitude| Longitude| Altitude|  */
   MAV_CMD_DO_PAUSE_CONTINUE=193, /* If in a GPS controlled position mode, hold the current position or continue. |0: Pause current mission or reposition command, hold current position. 1: Continue mission. A VTOL capable vehicle should enter hover mode (multicopter and VTOL planes). A plane should loiter with the default loiter radius.| Reserved| Reserved| Reserved| Reserved| Reserved| Reserved|  */
   MAV_CMD_DO_SET_REVERSE=194, /* Set moving direction to forward or reverse. |Direction (0=Forward, 1=Reverse)| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_SET_ROI_LOCATION=195, /* Sets the region of interest (ROI) to a location. This can then be used by the vehicle's control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Latitude of ROI location| Longitude of ROI location| Altitude of ROI location|  */
   MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET=196, /* Sets the region of interest (ROI) to be toward next waypoint, with optional pitch/roll/yaw offset. This can then be used by the vehicle's control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Pitch offset from next waypoint, positive pitching up| Roll offset from next waypoint, positive rolling to the right| Yaw offset from next waypoint, positive yawing to the right|  */
   MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicle's control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_SET_ROI_SYSID=198, /* Mount tracks system with specified system ID. Determination of target vehicle position may be done with GLOBAL_POSITION_INT or any other means. |System ID| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty|  */
   MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicle's control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of interest mode.| Waypoint index/ target ID (depends on param 1).| Region of interest index. (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z|  */
   MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Configure digital camera. This is a fallback message for systems that have not yet implemented PARAM_EXT_XXX messages and camera definition files (see https://mavlink.io/en/services/camera_def.html ). |Modes: P, TV, AV, M, Etc.| Shutter speed: Divisor number for one second.| Aperture: F stop number.| ISO number e.g. 80, 100, 200, Etc.| Exposure type enumerator.| Command Identity.| Main engine cut-off time before camera trigger. (0 means no cut-off)|  */
   MAV_CMD_DO_DIGICAM_CONTROL=203, /* Control digital camera. This is a fallback message for systems that have not yet implemented PARAM_EXT_XXX messages and camera definition files (see https://mavlink.io/en/services/camera_def.html ). |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.|  */
   MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| Empty| Empty| Empty|  */
   MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch (WIP: DEPRECATED: or lat in degrees) depending on mount mode.| roll (WIP: DEPRECATED: or lon in degrees) depending on mount mode.| yaw (WIP: DEPRECATED: or alt in meters) depending on mount mode.| WIP: alt in meters depending on mount mode.| WIP: latitude in degrees * 1E7, set if appropriate mount mode.| WIP: longitude in degrees * 1E7, set if appropriate mount mode.| Mount mode.|  */
   MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Fence types to enable or disable as a bitmask. A value of 0 indicates that all fences should be enabled or disabled. This parameter is ignored if param 1 has the value 2| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_PARACHUTE=208, /* Mission item/command to release a parachute or enable/disable auto release. |Action| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty|  */
   MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_GRIPPER=211, /* Mission command to operate a gripper. |Gripper instance number.| Gripper action to perform.| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_AUTOTUNE_ENABLE=212, /* Enable/disable autotune. |Enable (1: enable, 0:disable).| Specify which axes are autotuned. 0 indicates autopilot default settings.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_NAV_SET_YAW_SPEED=213, /* Sets a desired vehicle turn angle and speed change. |Yaw angle to adjust steering by.| Speed.| Final angle. (0=absolute, 1=relative)| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_SET_CAM_TRIGG_INTERVAL=214, /* Mission command to set camera trigger interval for this flight. If triggering is enabled, the camera is triggered each time this interval expires. This command can also be used to set the shutter integration time for the camera. |Camera trigger cycle time. -1 or 0 to ignore.| Camera shutter integration time. Should be less than trigger cycle time. -1 or 0 to ignore.| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_SET_RESUME_REPEAT_DIST=215, /* Set the distance to be repeated on mission resume |Distance.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_DO_SPRAYER=216, /* Control attached liquid sprayer |0: disable sprayer. 1: enable sprayer.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_DO_SEND_SCRIPT_MESSAGE=217, /* Pass instructions onto scripting, a script should be checking for a new command |uint16 ID value to be passed to scripting| float value to be passed to scripting| float value to be passed to scripting| float value to be passed to scripting| Empty.| Empty.| Empty.|  */
   MAV_CMD_DO_AUX_FUNCTION=218, /* Execute auxiliary function |Auxiliary Function.| Switch Level.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_DO_MOUNT_CONTROL_QUAT=220, /* Mission command to control a camera or antenna mount, using a quaternion as reference. |quaternion param q1, w (1 in null-rotation)| quaternion param q2, x (0 in null-rotation)| quaternion param q3, y (0 in null-rotation)| quaternion param q4, z (0 in null-rotation)| Empty| Empty| Empty|  */
   MAV_CMD_DO_GUIDED_MASTER=221, /* set id of master controller |System ID| Component ID| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_GUIDED_LIMITS=222, /* Set limits for external control |Timeout - maximum time that external controller will be allowed to control vehicle. 0 means no timeout.| Altitude (MSL) min - if vehicle moves below this alt, the command will be aborted and the mission will continue. 0 means no lower altitude limit.| Altitude (MSL) max - if vehicle moves above this alt, the command will be aborted and the mission will continue. 0 means no upper altitude limit.| Horizontal move limit - if vehicle moves more than this distance from its location at the moment the command was executed, the command will be aborted and the mission will continue. 0 means no horizontal move limit.| Empty| Empty| Empty|  */
   MAV_CMD_DO_ENGINE_CONTROL=223, /* Control vehicle engine. This is interpreted by the vehicles engine controller to change the target engine state. It is intended for vehicles with internal combustion engines |0: Stop engine, 1:Start Engine| 0: Warm start, 1:Cold start. Controls use of choke where applicable| Height delay. This is for commanding engine start only after the vehicle has gained the specified height. Used in VTOL vehicles during takeoff to start engine after the aircraft is off the ground. Zero for no delay.| A bitmask of options for engine control| Empty| Empty| Empty|  */
   MAV_CMD_DO_SET_MISSION_CURRENT=224, /* Set the mission item with sequence number seq as current item. This means that the MAV will continue to this mission item on the shortest path (not following the mission items in-between). |Mission sequence value to set| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_DO_LAST=240, /* NOP - This command is only used to mark the upper limit of the DO commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_PREFLIGHT_CALIBRATION=241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. Except for Temperature Calibration, only one sensor should be set in a single message and all others should be zero. |1: gyro calibration, 3: gyro temperature calibration| 1: magnetometer calibration| 1: ground pressure calibration| 1: radio RC calibration, 2: RC trim calibration| 1: accelerometer calibration, 2: board level calibration, 3: accelerometer temperature calibration, 4: simple accelerometer calibration| 1: APM: compass/motor interference calibration (PX4: airspeed calibration, deprecated), 2: airspeed calibration| 1: ESC calibration, 3: barometer temperature calibration|  */
   MAV_CMD_PREFLIGHT_SET_SENSOR_OFFSETS=242, /* Set sensor offsets. This command will be only accepted if in pre-flight mode. |Sensor to adjust the offsets for: 0: gyros, 1: accelerometer, 2: magnetometer, 3: barometer, 4: optical flow, 5: second magnetometer, 6: third magnetometer| X axis offset (or generic dimension 1), in the sensor's raw units| Y axis offset (or generic dimension 2), in the sensor's raw units| Z axis offset (or generic dimension 3), in the sensor's raw units| Generic dimension 4, in the sensor's raw units| Generic dimension 5, in the sensor's raw units| Generic dimension 6, in the sensor's raw units|  */
   MAV_CMD_PREFLIGHT_UAVCAN=243, /* Trigger UAVCAN configuration (actuator ID assignment and direction mapping). Note that this maps to the legacy UAVCAN v0 function UAVCAN_ENUMERATE, which is intended to be executed just once during initial vehicle configuration (it is not a normal pre-flight command and has been poorly named). |1: Trigger actuator ID assignment and direction mapping. 0: Cancel command.| Reserved| Reserved| Reserved| Reserved| Reserved| Reserved|  */
   MAV_CMD_PREFLIGHT_STORAGE=245, /* Request storage of different parameter values and logs. This command will be only accepted if in pre-flight mode. |Parameter storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM, 2: Reset to defaults| Mission storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM, 2: Reset to defaults| Onboard logging: 0: Ignore, 1: Start default rate logging, -1: Stop logging, > 1: logging rate (e.g. set to 1000 for 1000 Hz logging)| Reserved| Empty| Empty| Empty|  */
   MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN=246, /* Request the reboot or shutdown of system components. |0: Do nothing for autopilot, 1: Reboot autopilot, 2: Shutdown autopilot, 3: Reboot autopilot and keep it in the bootloader until upgraded.| 0: Do nothing for onboard computer, 1: Reboot onboard computer, 2: Shutdown onboard computer, 3: Reboot onboard computer and keep it in the bootloader until upgraded.| WIP: 0: Do nothing for camera, 1: Reboot onboard camera, 2: Shutdown onboard camera, 3: Reboot onboard camera and keep it in the bootloader until upgraded| WIP: 0: Do nothing for mount (e.g. gimbal), 1: Reboot mount, 2: Shutdown mount, 3: Reboot mount and keep it in the bootloader until upgraded| Reserved (set to 0)| Reserved (set to 0)| WIP: ID (e.g. camera ID -1 for all IDs)|  */
   MAV_CMD_OVERRIDE_GOTO=252, /* Override current mission with command to pause mission, pause mission and move to position, continue/resume mission. When param 1 indicates that the mission is paused (MAV_GOTO_DO_HOLD), param 2 defines whether it holds in place or moves to another position. |MAV_GOTO_DO_HOLD: pause mission and either hold or move to specified position (depending on param2), MAV_GOTO_DO_CONTINUE: resume mission.| MAV_GOTO_HOLD_AT_CURRENT_POSITION: hold at current position, MAV_GOTO_HOLD_AT_SPECIFIED_POSITION: hold at specified position.| Coordinate frame of hold point.| Desired yaw angle.| Latitude/X position.| Longitude/Y position.| Altitude/Z position.|  */
   MAV_CMD_OBLIQUE_SURVEY=260, /* Mission command to set a Camera Auto Mount Pivoting Oblique Survey (Replaces CAM_TRIGG_DIST for this purpose). The camera is triggered each time this distance is exceeded, then the mount moves to the next position. Params 4~6 set-up the angle limits and number of positions for oblique survey, where mount-enabled vehicles automatically roll the camera between shots to emulate an oblique camera setup (providing an increased HFOV). This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. 0 to ignore| The minimum interval in which the camera is capable of taking subsequent pictures repeatedly. 0 to ignore.| Total number of roll positions at which the camera will capture photos (images captures spread evenly across the limits defined by param5).| Angle limits that the camera can be rolled to left and right of center.| Fixed pitch angle that the camera will hold in oblique mode if the mount is actuated in the pitch axis.| Empty|  */
   MAV_CMD_MISSION_START=300, /* start running a mission |first_item: the first mission item to run| last_item:  the last mission item to run (after this item is run, the mission ends)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_COMPONENT_ARM_DISARM=400, /* Arms / Disarms a component |0: disarm, 1: arm| 0: arm-disarm unless prevented by safety checks (i.e. when landed), 21196: force arming/disarming (e.g. allow arming to override preflight checks and disarming in flight)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_RUN_PREARM_CHECKS=401, /* Instructs system to run pre-arm checks.  This command should return MAV_RESULT_TEMPORARILY_REJECTED in the case the system is armed, otherwse MAV_RESULT_ACCEPTED.  Note that the return value from executing this command does not indicate whether the vehicle is armable or not, just whether the system has successfully run/is currently running the checks.  The result of the checks is reflected in the SYS_STATUS message. |Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_GET_HOME_POSITION=410, /* Request the home position from the vehicle. |Reserved| Reserved| Reserved| Reserved| Reserved| Reserved| Reserved|  */
   MAV_CMD_START_RX_PAIR=500, /* Starts receiver pairing. |0:Spektrum.| RC type.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_GET_MESSAGE_INTERVAL=510, /* Request the interval between messages for a particular MAVLink message ID. The receiver should ACK the command and then emit its response in a MESSAGE_INTERVAL message. |The MAVLink message ID| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Set the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM. |The MAVLink message ID| The interval between two messages. Set to -1 to disable and 0 to request default rate.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Target address of message stream (if message has target address fields). 0: Flight-stack default (recommended), 1: address of requestor, 2: broadcast.|  */
   MAV_CMD_REQUEST_MESSAGE=512, /* Request the target system(s) emit a single instance of a specified message (i.e. a "one-shot" version of MAV_CMD_SET_MESSAGE_INTERVAL). |The MAVLink message ID of the requested message.| Use for index ID, if required. Otherwise, the use of this parameter (if any) must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| Target address for requested message (if message has target address fields). 0: Flight-stack default, 1: address of requestor, 2: broadcast.|  */
   MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility. All receivers should ACK the command and then emit their capabilities in an PROTOCOL_VERSION message |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities. The receiver should ACK the command and then emit its capabilities in an AUTOPILOT_VERSION message |1: Request autopilot version| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_STORAGE_FORMAT=526, /* Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NaN for reserved values. GCS will send a MAV_CMD_REQUEST_VIDEO_STREAM_STATUS command after a mode change if the camera supports video streaming. |Reserved (Set to 0)| Camera mode| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_SET_CAMERA_ZOOM=531, /* Set camera zoom. Camera must respond with a CAMERA_SETTINGS message (on success). |Zoom type| Zoom value. The range of valid values depend on the zoom type.| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_SET_CAMERA_FOCUS=532, /* Set camera focus. Camera must respond with a CAMERA_SETTINGS message (on success). |Focus type| Focus value| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_SET_STORAGE_USAGE=533, /* Set that a particular storage is the preferred location for saving photos, videos, and/or other media (e.g. to set that an SD card is used for storing videos).
          There can only be one preferred save location for each particular media type: setting a media usage flag will clear/reset that same flag if set on any other storage.
          If no flag is set the system should use its default storage.
          A target system can choose to always use default storage, in which case it should ACK the command with MAV_RESULT_UNSUPPORTED.
          A target system can choose to not allow a particular storage to be set as preferred storage, in which case it should ACK the command with MAV_RESULT_DENIED. |Storage ID (1 for first, 2 for second, etc.)| Usage flags| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_SET_CAMERA_SOURCE=534, /* Set camera source. Changes the camera's active sources on cameras with multiple image sensors. |Component Id of camera to address or 1-6 for non-MAVLink cameras, 0 for all cameras.| Primary Source| Secondary Source. If non-zero the second source will be displayed as picture-in-picture.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_JUMP_TAG=600, /* Tagged jump target. Can be jumped to with MAV_CMD_DO_JUMP_TAG. |Tag.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_JUMP_TAG=601, /* Jump to the matching tag in the mission list. Repeat this action for the specified number of times. A mission should contain a single matching tag for each jump. If this is not the case then a jump to a missing tag should complete the mission, and a jump where there are multiple matching tags should always select the one with the lowest mission sequence number. |Target tag to jump to.| Repeat count.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_SET_SYS_CMP_ID=610, /* 
          Set system and component id.
          This allows moving of a system and all its components to a new system id, or moving a particular component to a new system/component id.
          Recipients must reject command addressed to broadcast system ID.
         |New system ID for target component(s). 0: ignore and reject command (broadcast system ID not allowed).| New component ID for target component(s). 0: ignore (component IDs don't change).| Reboot components after ID change. Any non-zero value triggers the reboot.| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_GIMBAL_MANAGER_PITCHYAW=1000, /* Set gimbal manager pitch/yaw setpoints (low rate command). It is possible to set combinations of the values below. E.g. an angle as well as a desired angular rate can be used to get to this angle at a certain angular rate, or an angular rate only will result in continuous turning. NaN is to be used to signal unset. Note: only the gimbal manager will react to this command - it will be ignored by a gimbal device. Use GIMBAL_MANAGER_SET_PITCHYAW if you need to stream pitch/yaw setpoints at higher rate.  |Pitch angle (positive to pitch up, relative to vehicle for FOLLOW mode, relative to world horizon for LOCK mode).| Yaw angle (positive to yaw to the right, relative to vehicle for FOLLOW mode, absolute to North for LOCK mode).| Pitch rate (positive to pitch up).| Yaw rate (positive to yaw to the right).| Gimbal manager flags to use.| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. Send command multiple times for more than one gimbal (but not all gimbals).|  */
   MAV_CMD_DO_GIMBAL_MANAGER_CONFIGURE=1001, /* Gimbal configuration to set which sysid/compid is in primary and secondary control. |Sysid for primary control (0: no one in control, -1: leave unchanged, -2: set itself in control (for missions where the own sysid is still unknown), -3: remove control if currently in control).| Compid for primary control (0: no one in control, -1: leave unchanged, -2: set itself in control (for missions where the own sysid is still unknown), -3: remove control if currently in control).| Sysid for secondary control (0: no one in control, -1: leave unchanged, -2: set itself in control (for missions where the own sysid is still unknown), -3: remove control if currently in control).| Compid for secondary control (0: no one in control, -1: leave unchanged, -2: set itself in control (for missions where the own sysid is still unknown), -3: remove control if currently in control).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. Send command multiple times for more than one gimbal (but not all gimbals).|  */
   MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. CAMERA_IMAGE_CAPTURED must be emitted after each capture.

          Param1 (id) may be used to specify the target camera: 0: all cameras, 1 to 6: autopilot-connected cameras, 7-255: MAVLink camera component ID.
          It is needed in order to target specific cameras connected to the autopilot, or specific sensors in a multi-sensor camera (neither of which have a distinct MAVLink component ID).
          It is also needed to specify the target camera in missions.

          When used in a mission, an autopilot should execute the MAV_CMD for a specified local camera (param1 = 1-6), or resend it as a command if it is intended for a MAVLink camera (param1 = 7 - 255), setting the command's target_component as the param1 value (and setting param1 in the command to zero).
          If the param1 is 0 the autopilot should do both.

          When sent in a command the target MAVLink address is set using target_component.
          If addressed specifically to an autopilot: param1 should be used in the same way as it is for missions (though command should NACK with MAV_RESULT_DENIED if a specified local camera does not exist).
          If addressed to a MAVLink camera, param 1 can be used to address all cameras (0), or to separately address 1 to 7 individual sensors. Other values should be NACKed with MAV_RESULT_DENIED.
          If the command is broadcast (target_component is 0) then param 1 should be set to 0 (any other value should be NACKED with MAV_RESULT_DENIED). An autopilot would trigger any local cameras and forward the command to all channels.
         |Target camera ID. 7 to 255: MAVLink camera component id. 1 to 6 for cameras that don't have a distinct component id (such as autopilot-attached cameras). 0: all cameras. This is used to specifically target autopilot-connected cameras or individual sensors in a multi-sensor MAVLink camera. It is also used to target specific cameras when the MAV_CMD is used in a mission| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1), otherwise set to 0. Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted.| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
   MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence.

          Param1 (id) may be used to specify the target camera: 0: all cameras, 1 to 6: autopilot-connected cameras, 7-255: MAVLink camera component ID.
          It is needed in order to target specific cameras connected to the autopilot, or specific sensors in a multi-sensor camera (neither of which have a distinct MAVLink component ID).
          It is also needed to specify the target camera in missions.

          When used in a mission, an autopilot should execute the MAV_CMD for a specified local camera (param1 = 1-6), or resend it as a command if it is intended for a MAVLink camera (param1 = 7 - 255), setting the command's target_component as the param1 value (and setting param1 in the command to zero).
          If the param1 is 0 the autopilot should do both.

          When sent in a command the target MAVLink address is set using target_component.
          If addressed specifically to an autopilot: param1 should be used in the same way as it is for missions (though command should NACK with MAV_RESULT_DENIED if a specified local camera does not exist).
          If addressed to a MAVLink camera, param1 can be used to address all cameras (0), or to separately address 1 to 7 individual sensors. Other values should be NACKed with MAV_RESULT_DENIED.
          If the command is broadcast (target_component is 0) then param 1 should be set to 0 (any other value should be NACKED with MAV_RESULT_DENIED). An autopilot would trigger any local cameras and forward the command to all channels.
         |Target camera ID. 7 to 255: MAVLink camera component id. 1 to 6 for cameras that don't have a distinct component id (such as autopilot-attached cameras). 0: all cameras. This is used to specifically target autopilot-connected cameras or individual sensors in a multi-sensor MAVLink camera. It is also used to target specific cameras when the MAV_CMD is used in a mission| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)|  */
   MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_CAMERA_TRACK_POINT=2004, /* If the camera supports point visual tracking (CAMERA_CAP_FLAGS_HAS_TRACKING_POINT is set), this command allows to initiate the tracking. |Point to track x value (normalized 0..1, 0 is left, 1 is right).| Point to track y value (normalized 0..1, 0 is top, 1 is bottom).| Point radius (normalized 0..1, 0 is image left, 1 is image right).| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_CAMERA_TRACK_RECTANGLE=2005, /* If the camera supports rectangle visual tracking (CAMERA_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_CAMERA_STOP_TRACKING=2010, /* Stops ongoing tracking. |Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
   MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
   MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_LOGGING_START=2510, /* Request to start streaming logging data over MAVLink (see also LOGGING_DATA message) |Format: 0: ULog| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
   MAV_CMD_LOGGING_STOP=2511, /* Request to stop streaming log data over MAVLink |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
   MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)|  */
   MAV_CMD_CONTROL_HIGH_LATENCY=2600, /* Request to start/stop transmitting over the high latency telemetry |Control transmission over high latency telemetry (0: stop, 1: start)| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_PANORAMA_CREATE=2800, /* Create a panorama at the current position |Viewing angle horizontal of the panorama (+- 0.5 the total angle)| Viewing angle vertical of panorama.| Speed of the horizontal rotation.| Speed of the vertical rotation.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_VTOL_TRANSITION=3000, /* Request VTOL transition |The target VTOL state. Only MAV_VTOL_STATE_MC and MAV_VTOL_STATE_FW can be used.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_ARM_AUTHORIZATION_REQUEST=3001, /* Request authorization to arm the vehicle to a external entity, the arm authorizer is responsible to request all data that is needs from the vehicle before authorize or deny the request. If approved the progress of command_ack message should be set with period of time that this authorization is valid in seconds or in case it was denied it should be set with one of the reasons in ARM_AUTH_DENIED_REASON.
         |Vehicle system id, this way ground station can request arm authorization on behalf of any vehicle| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_SET_GUIDED_SUBMODE_STANDARD=4000, /* This command sets the submode to standard guided when vehicle is in guided mode. The vehicle holds position and altitude and the user can input the desired velocities along all three axes.
                   |Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_SET_GUIDED_SUBMODE_CIRCLE=4001, /* This command sets submode circle when vehicle is in guided mode. Vehicle flies along a circle facing the center of the circle. The user can input the velocity along the circle and change the radius. If no input is given the vehicle will hold position.
                   |Radius of desired circle in CIRCLE_MODE| User defined| User defined| User defined| Target latitude of center of circle in CIRCLE_MODE| Target longitude of center of circle in CIRCLE_MODE| Reserved (default:0)|  */
   MAV_CMD_NAV_FENCE_RETURN_POINT=5000, /* Fence return point (there can only be one such point in a geofence definition). If rally points are supported they should be used instead. |Reserved| Reserved| Reserved| Reserved| Latitude| Longitude| Altitude|  */
   MAV_CMD_NAV_FENCE_POLYGON_VERTEX_INCLUSION=5001, /* Fence vertex for an inclusion polygon (the polygon must not be self-intersecting). The vehicle must stay within this area. Minimum of 3 vertices required.
         |Polygon vertex count| Vehicle must be inside ALL inclusion zones in a single group, vehicle must be inside at least one group, must be the same for all points in each polygon| Reserved| Reserved| Latitude| Longitude| Reserved|  */
   MAV_CMD_NAV_FENCE_POLYGON_VERTEX_EXCLUSION=5002, /* Fence vertex for an exclusion polygon (the polygon must not be self-intersecting). The vehicle must stay outside this area. Minimum of 3 vertices required.
         |Polygon vertex count| Reserved| Reserved| Reserved| Latitude| Longitude| Reserved|  */
   MAV_CMD_NAV_FENCE_CIRCLE_INCLUSION=5003, /* Circular fence area. The vehicle must stay inside this area.
         |Radius.| Vehicle must be inside ALL inclusion zones in a single group, vehicle must be inside at least one group| Reserved| Reserved| Latitude| Longitude| Reserved|  */
   MAV_CMD_NAV_FENCE_CIRCLE_EXCLUSION=5004, /* Circular fence area. The vehicle must stay outside this area.
         |Radius.| Reserved| Reserved| Reserved| Latitude| Longitude| Reserved|  */
   MAV_CMD_NAV_RALLY_POINT=5100, /* Rally point. You can have multiple rally points defined.
         |Reserved| Reserved| Reserved| Reserved| Latitude| Longitude| Altitude|  */
   MAV_CMD_UAVCAN_GET_NODE_INFO=5200, /* Commands the vehicle to respond with a sequence of messages UAVCAN_NODE_INFO, one message per every UAVCAN node that is online. Note that some of the response messages can be lost, which the receiver can detect easily by checking whether every received UAVCAN_NODE_STATUS has a matching message UAVCAN_NODE_INFO received earlier; if not, this command should be sent again in order to request re-transmission of the node information messages. |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
   MAV_CMD_DO_SET_SAFETY_SWITCH_STATE=5300, /* Change state of safety switch. |New safety switch state.| Empty.| Empty.| Empty| Empty.| Empty.| Empty.|  */
   MAV_CMD_DO_ADSB_OUT_IDENT=10001, /* Trigger the start of an ADSB-out IDENT. This should only be used when requested to do so by an Air Traffic Controller in controlled airspace. This starts the IDENT which is then typically held for 18 seconds by the hardware per the Mode A, C, and S transponder spec. |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
   MAV_CMD_LOWEHEISER_SET_STATE=10151, /* Set Loweheiser desired states |EFI Index| Desired Engine/EFI State (0: Power Off, 1:Running)| Desired Governor State (0:manual throttle, 1:Governed throttle)| Manual throttle level, 0% - 100%| Electronic Start up (0:Off, 1:On)| Empty| Empty|  */
   MAV_CMD_PAYLOAD_PREPARE_DEPLOY=30001, /* Deploy payload on a Lat / Lon / Alt position. This includes the navigation to reach the required release position and velocity. |Operation mode. 0: prepare single payload deploy (overwriting previous requests), but do not execute it. 1: execute payload deploy immediately (rejecting further deploy commands during execution, but allowing abort). 2: add payload deploy to existing deployment list.| Desired approach vector in compass heading. A negative value indicates the system can define the approach vector at will.| Desired ground speed at release time. This can be overridden by the airframe in case it needs to meet minimum airspeed. A negative value indicates the system can define the ground speed at will.| Minimum altitude clearance to the release position. A negative value indicates the system can define the clearance at will.| Latitude. Note, if used in MISSION_ITEM (deprecated) the units are degrees (unscaled)| Longitude. Note, if used in MISSION_ITEM (deprecated) the units are degrees (unscaled)| Altitude (MSL)|  */
   MAV_CMD_PAYLOAD_CONTROL_DEPLOY=30002, /* Control the payload deployment. |Operation mode. 0: Abort deployment, continue normal mission. 1: switch to payload deployment mode. 100: delete first payload deployment request. 101: delete all payload deployment requests.| Reserved| Reserved| Reserved| Reserved| Reserved| Reserved|  */
   MAV_CMD_WAYPOINT_USER_1=31000, /* User defined waypoint item. Ground Station will show the Vehicle as flying through this item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL)|  */
   MAV_CMD_WAYPOINT_USER_2=31001, /* User defined waypoint item. Ground Station will show the Vehicle as flying through this item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL)|  */
   MAV_CMD_WAYPOINT_USER_3=31002, /* User defined waypoint item. Ground Station will show the Vehicle as flying through this item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL)|  */
   MAV_CMD_WAYPOINT_USER_4=31003, /* User defined waypoint item. Ground Station will show the Vehicle as flying through this item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL)|  */
   MAV_CMD_WAYPOINT_USER_5=31004, /* User defined waypoint item. Ground Station will show the Vehicle as flying through this item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL)|  */
   MAV_CMD_SPATIAL_USER_1=31005, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL)|  */
   MAV_CMD_SPATIAL_USER_2=31006, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL)|  */
   MAV_CMD_SPATIAL_USER_3=31007, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL)|  */
   MAV_CMD_SPATIAL_USER_4=31008, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL)|  */
   MAV_CMD_SPATIAL_USER_5=31009, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL)|  */
   MAV_CMD_USER_1=31010, /* User defined command. Ground Station will not show the Vehicle as flying through this item. Example: MAV_CMD_DO_SET_PARAMETER item. |User defined| User defined| User defined| User defined| User defined| User defined| User defined|  */
   MAV_CMD_USER_2=31011, /* User defined command. Ground Station will not show the Vehicle as flying through this item. Example: MAV_CMD_DO_SET_PARAMETER item. |User defined| User defined| User defined| User defined| User defined| User defined| User defined|  */
   MAV_CMD_USER_3=31012, /* User defined command. Ground Station will not show the Vehicle as flying through this item. Example: MAV_CMD_DO_SET_PARAMETER item. |User defined| User defined| User defined| User defined| User defined| User defined| User defined|  */
   MAV_CMD_USER_4=31013, /* User defined command. Ground Station will not show the Vehicle as flying through this item. Example: MAV_CMD_DO_SET_PARAMETER item. |User defined| User defined| User defined| User defined| User defined| User defined| User defined|  */
   MAV_CMD_USER_5=31014, /* User defined command. Ground Station will not show the Vehicle as flying through this item. Example: MAV_CMD_DO_SET_PARAMETER item. |User defined| User defined| User defined| User defined| User defined| User defined| User defined|  */
   MAV_CMD_CAN_FORWARD=32000, /* Request forwarding of CAN packets from the given CAN bus to this interface. CAN Frames are sent using CAN_FRAME and CANFD_FRAME messages |Bus number (0 to disable forwarding, 1 for first bus, 2 for 2nd bus, 3 for 3rd bus).| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_RESET_MPPT=40001, /* Mission command to reset Maximum Power Point Tracker (MPPT) |MPPT number| Empty| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_PAYLOAD_CONTROL=40002, /* Mission command to perform a power cycle on payload |Complete power cycle| VISensor power cycle| Empty| Empty| Empty| Empty| Empty|  */
   MAV_CMD_POWER_OFF_INITIATED=42000, /* A system wide power-off event has been initiated. |Empty.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_SOLO_BTN_FLY_CLICK=42001, /* FLY button has been clicked. |Empty.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_SOLO_BTN_FLY_HOLD=42002, /* FLY button has been held for 1.5 seconds. |Takeoff altitude.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_SOLO_BTN_PAUSE_CLICK=42003, /* PAUSE button has been clicked. |1 if Solo is in a shot mode, 0 otherwise.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_FIXED_MAG_CAL=42004, /* Magnetometer calibration based on fixed position
        in earth field given by inclination, declination and intensity. |Magnetic declination.| Magnetic inclination.| Magnetic intensity.| Yaw.| Empty.| Empty.| Empty.|  */
   MAV_CMD_FIXED_MAG_CAL_FIELD=42005, /* Magnetometer calibration based on fixed expected field values. |Field strength X.| Field strength Y.| Field strength Z.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_FIXED_MAG_CAL_YAW=42006, /* Magnetometer calibration based on provided known yaw. This allows for fast calibration using WMM field tables in the vehicle, given only the known yaw of the vehicle. If Latitude and longitude are both zero then use the current vehicle location. |Yaw of vehicle in earth frame.| CompassMask, 0 for all.| Latitude.| Longitude.| Empty.| Empty.| Empty.|  */
   MAV_CMD_SET_EKF_SOURCE_SET=42007, /* Set EKF sensor source set. |Source Set Id.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_DO_START_MAG_CAL=42424, /* Initiate a magnetometer calibration. |Bitmask of magnetometers to calibrate. Use 0 to calibrate all sensors that can be started (sensors may not start if disabled, unhealthy, etc.). The command will NACK if calibration does not start for a sensor explicitly specified by the bitmask.| Automatically retry on failure (0=no retry, 1=retry).| Save without user input (0=require input, 1=autosave).| Delay.| Autoreboot (0=user reboot, 1=autoreboot).| Empty.| Empty.|  */
   MAV_CMD_DO_ACCEPT_MAG_CAL=42425, /* Accept a magnetometer calibration. |Bitmask of magnetometers that calibration is accepted (0 means all).| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_DO_CANCEL_MAG_CAL=42426, /* Cancel a running magnetometer calibration. |Bitmask of magnetometers to cancel a running calibration (0 means all).| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_SET_FACTORY_TEST_MODE=42427, /* Command autopilot to get into factory test/diagnostic mode. |0: activate test mode, 1: exit test mode.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_DO_SEND_BANNER=42428, /* Reply with the version banner. |Empty.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_ACCELCAL_VEHICLE_POS=42429, /* Used when doing accelerometer calibration. When sent to the GCS tells it what position to put the vehicle in. When sent to the vehicle says what position the vehicle is in. |Position.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_GIMBAL_RESET=42501, /* Causes the gimbal to reset and boot as if it was just powered on. |Empty.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_GIMBAL_AXIS_CALIBRATION_STATUS=42502, /* Reports progress and success or failure of gimbal axis calibration procedure. |Gimbal axis we're reporting calibration progress for.| Current calibration progress for this axis.| Status of the calibration.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_GIMBAL_REQUEST_AXIS_CALIBRATION=42503, /* Starts commutation calibration on the gimbal. |Empty.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_GIMBAL_FULL_RESET=42505, /* Erases gimbal application and parameters. |Magic number.| Magic number.| Magic number.| Magic number.| Magic number.| Magic number.| Magic number.|  */
   MAV_CMD_DO_WINCH=42600, /* Command to operate winch. |Winch instance number.| Action to perform.| Length of cable to release (negative to wind).| Release rate (negative to wind).| Empty.| Empty.| Empty.|  */
   MAV_CMD_FLASH_BOOTLOADER=42650, /* Update the bootloader |Empty| Empty| Empty| Empty| Magic number - set to 290876 to actually flash| Empty| Empty|  */
   MAV_CMD_BATTERY_RESET=42651, /* Reset battery capacity for batteries that accumulate consumed battery via integration. |Bitmask of batteries to reset. Least significant bit is for the first battery.| Battery percentage remaining to set.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DEBUG_TRAP=42700, /* Issue a trap signal to the autopilot process, presumably to enter the debugger. |Magic number - set to 32451 to actually trap.| Empty.| Empty.| Empty.| Empty.| Empty.| Empty.|  */
   MAV_CMD_SCRIPTING=42701, /* Control onboard scripting. |Scripting command to execute| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_NAV_SCRIPT_TIME=42702, /* Scripting command as NAV command with wait for completion. |integer command number (0 to 255)| timeout for operation in seconds. Zero means no timeout (0 to 255)| argument1.| argument2.| argument3.| argument4.| Empty|  */
   MAV_CMD_NAV_ATTITUDE_TIME=42703, /* Maintain an attitude for a specified time. |Time to maintain specified attitude and climb rate| Roll angle in degrees (positive is lean right, negative is lean left)| Pitch angle in degrees (positive is lean back, negative is lean forward)| Yaw angle| Climb rate| Empty| Empty|  */
   MAV_CMD_GUIDED_CHANGE_SPEED=43000, /* Change flight speed at a given rate. This slews the vehicle at a controllable rate between it's previous speed and the new one. (affects GUIDED only. Outside GUIDED, aircraft ignores these commands. Designed for onboard companion-computer command-and-control, not normally operator/GCS control.) |Airspeed or groundspeed.| Target Speed| Acceleration rate, 0 to take effect instantly| Empty| Empty| Empty| Empty|  */
   MAV_CMD_GUIDED_CHANGE_ALTITUDE=43001, /* Change target altitude at a given rate. This slews the vehicle at a controllable rate between it's previous altitude and the new one. (affects GUIDED only. Outside GUIDED, aircraft ignores these commands. Designed for onboard companion-computer command-and-control, not normally operator/GCS control.) |Empty| Empty| Rate of change, toward new altitude. 0 for maximum rate change. Positive numbers only, as negative numbers will not converge on the new target alt.| Empty| Empty| Empty| Target Altitude|  */
   MAV_CMD_GUIDED_CHANGE_HEADING=43002, /* Change to target heading at a given rate, overriding previous heading/s. This slews the vehicle at a controllable rate between it's previous heading and the new one. (affects GUIDED only. Exiting GUIDED returns aircraft to normal behaviour defined elsewhere. Designed for onboard companion-computer command-and-control, not normally operator/GCS control.) |course-over-ground or raw vehicle heading.| Target heading.| Maximum centripetal accelearation, ie rate of change,  toward new heading.| Empty| Empty| Empty| Empty|  */
   MAV_CMD_EXTERNAL_POSITION_ESTIMATE=43003, /* Provide an external position estimate for use when dead-reckoning. This is meant to be used for occasional position resets that may be provided by a external system such as a remote pilot using landmarks over a video link. |Timestamp that this message was sent as a time in the transmitters time domain. The sender should wrap this time back to zero based on required timing accuracy for the application and the limitations of a 32 bit float. For example, wrapping at 10 hours would give approximately 1ms accuracy. Recipient must handle time wrap in any timing jitter correction applied to this field. Wrap rollover time should not be at not more than 250 seconds, which would give approximately 10 microsecond accuracy.| The time spent in processing the sensor data that is the basis for this position. The recipient can use this to improve time alignment of the data. Set to zero if not known.| estimated one standard deviation accuracy of the measurement. Set to NaN if not known.| Empty| Latitude| Longitude| Altitude, not used. Should be sent as NaN. May be supported in a future version of this message.|  */
   MAV_CMD_EXTERNAL_WIND_ESTIMATE=43004, /* Set an external estimate of wind direction and speed.
          This might be used to provide an initial wind estimate to the estimator (EKF) in the case where the vehicle is wind dead-reckoning, extending the time when operating without GPS before before position drift builds to an unsafe level. For this use case the command might reasonably be sent every few minutes when operating at altitude, and the value is cleared if the estimator resets itself.
         |Horizontal wind speed.| Estimated 1 sigma accuracy of wind speed. Set to NaN if unknown.| Azimuth (relative to true north) from where the wind is blowing.| Estimated 1 sigma accuracy of wind direction. Set to NaN if unknown.| Empty| Empty| Empty|  */
   MAV_CMD_SET_HAGL=43005, /* Provide a value for height above ground level. This can be used for things like fixed wing and VTOL landing. |Height above ground level.| estimated one standard deviation accuracy of the measurement. Set to NaN if not known.| Timeout for this data. The flight controller should only consider this data valid within the timeout window.| Empty| Empty| Empty| Empty|  */
   MAV_CMD_STORM32_DO_GIMBAL_MANAGER_CONTROL_PITCHYAW=60002, /* Command to a gimbal manager to control the gimbal tilt and pan angles. It is possible to set combinations of the values below. E.g. an angle as well as a desired angular rate can be used to get to this angle at a certain angular rate, or an angular rate only will result in continuous turning. NaN is to be used to signal unset. A gimbal device is never to react to this command. |Pitch/tilt angle (positive: tilt up, NaN to be ignored).| Yaw/pan angle (positive: pan to the right, the frame is determined by the STORM32_GIMBAL_DEVICE_FLAGS_YAW_ABSOLUTE flag, NaN to be ignored).| Pitch/tilt rate (positive: tilt up, NaN to be ignored).| Yaw/pan rate (positive: pan to the right, the frame is determined by the STORM32_GIMBAL_DEVICE_FLAGS_YAW_ABSOLUTE flag, NaN to be ignored).| Gimbal device flags.| Gimbal manager flags.| Gimbal ID of the gimbal manager to address (component ID or 1-6 for non-MAVLink gimbal, 0 for all gimbals, send command multiple times for more than one but not all gimbals). The client is copied into bits 8-15.|  */
   MAV_CMD_STORM32_DO_GIMBAL_MANAGER_SETUP=60010, /* Command to configure a gimbal manager. A gimbal device is never to react to this command. The selected profile is reported in the STORM32_GIMBAL_MANAGER_STATUS message. |Gimbal manager profile (0 = default).| Gimbal manager setup flags (0 = none).| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Gimbal ID of the gimbal manager to address (component ID or 1-6 for non-MAVLink gimbal, 0 for all gimbals). Send command multiple times for more than one but not all gimbals.|  */
   MAV_CMD_STORM32_DO_GIMBAL_ACTION=60011, /* Command to initiate gimbal actions. Usually performed by the gimbal device, but some can also be done by the gimbal manager. It is hence best to broadcast this command. |Gimbal action to initiate (0 = none).| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Gimbal ID of the gimbal to address (component ID or 1-6 for non-MAVLink gimbal, 0 for all gimbals). Send command multiple times for more than one but not all gimbals.|  */
   MAV_CMD_QSHOT_DO_CONFIGURE=60020, /* Command to set the shot manager mode. |Set shot mode.| Set shot state or command. The allowed values are specific to the selected shot mode.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_PRS_SET_ARM=60050, /* AVSS defined command. Set PRS arm statuses. |PRS arm statuses| User defined| User defined| User defined| User defined| User defined| User defined|  */
   MAV_CMD_PRS_GET_ARM=60051, /* AVSS defined command. Gets PRS arm statuses |User defined| User defined| User defined| User defined| User defined| User defined| User defined|  */
   MAV_CMD_PRS_GET_BATTERY=60052, /* AVSS defined command.  Get the PRS battery voltage in millivolts |User defined| User defined| User defined| User defined| User defined| User defined| User defined|  */
   MAV_CMD_PRS_GET_ERR=60053, /* AVSS defined command. Get the PRS error statuses. |User defined| User defined| User defined| User defined| User defined| User defined| User defined|  */
   MAV_CMD_PRS_SET_ARM_ALTI=60070, /* AVSS defined command. Set the ATS arming altitude in meters. |ATS arming altitude| User defined| User defined| User defined| User defined| User defined| User defined|  */
   MAV_CMD_PRS_GET_ARM_ALTI=60071, /* AVSS defined command. Get the ATS arming altitude in meters. |User defined| User defined| User defined| User defined| User defined| User defined| User defined|  */
   MAV_CMD_PRS_SHUTDOWN=60072, /* AVSS defined command. Shuts down the PRS system. |User defined| User defined| User defined| User defined| User defined| User defined| User defined|  */
   MAV_CMD_ENUM_END=60073, /*  | */
} MAV_CMD;
#endif

/** @brief  */
#ifndef HAVE_ENUM_SCRIPTING_CMD
#define HAVE_ENUM_SCRIPTING_CMD
typedef enum SCRIPTING_CMD
{
   SCRIPTING_CMD_REPL_START=0, /* Start a REPL session. | */
   SCRIPTING_CMD_REPL_STOP=1, /* End a REPL session. | */
   SCRIPTING_CMD_STOP=2, /* Stop execution of scripts. | */
   SCRIPTING_CMD_STOP_AND_RESTART=3, /* Stop execution of scripts and restart. | */
   SCRIPTING_CMD_ENUM_END=4, /*  | */
} SCRIPTING_CMD;
#endif

/** @brief  */
#ifndef HAVE_ENUM_SECURE_COMMAND_OP
#define HAVE_ENUM_SECURE_COMMAND_OP
typedef enum SECURE_COMMAND_OP
{
   SECURE_COMMAND_GET_SESSION_KEY=0, /* Get an 8 byte session key which is used for remote secure updates which operate on flight controller data such as bootloader public keys. Return data will be 8 bytes on success. The session key remains valid until either the flight controller reboots or another SECURE_COMMAND_GET_SESSION_KEY is run. | */
   SECURE_COMMAND_GET_REMOTEID_SESSION_KEY=1, /* Get an 8 byte session key which is used for remote secure updates which operate on RemoteID module data. Return data will be 8 bytes on success. The session key remains valid until either the remote ID module reboots or another SECURE_COMMAND_GET_REMOTEID_SESSION_KEY is run. | */
   SECURE_COMMAND_REMOVE_PUBLIC_KEYS=2, /* Remove range of public keys from the bootloader. Command data consists of two bytes, first byte if index of first public key to remove. Second byte is the number of keys to remove. If all keys are removed then secure boot is disabled and insecure firmware can be loaded. | */
   SECURE_COMMAND_GET_PUBLIC_KEYS=3, /* Get current public keys from the bootloader. Command data consists of two bytes, first byte is index of first public key to fetch, 2nd byte is number of keys to fetch. Total data needs to fit in data portion of reply (max 6 keys for 32 byte keys). Reply data has the index of the first key in the first byte, followed by the keys. Returned keys may be less than the number of keys requested if there are less keys installed than requested. | */
   SECURE_COMMAND_SET_PUBLIC_KEYS=4, /* Set current public keys in the bootloader. Data consists of a one byte public key index followed by the public keys. With 32 byte keys this allows for up to 6 keys to be set in one request. Keys outside of the range that is being set will remain unchanged. | */
   SECURE_COMMAND_GET_REMOTEID_CONFIG=5, /* Get config data for remote ID module. This command should be sent to the component ID of the flight controller which will forward it to the RemoteID module either over mavlink or DroneCAN. Data format is specific to the RemoteID implementation, see RemoteID firmware documentation for details. | */
   SECURE_COMMAND_SET_REMOTEID_CONFIG=6, /* Set config data for remote ID module. This command should be sent to the component ID of the flight controller which will forward it to the RemoteID module either over mavlink or DroneCAN. Data format is specific to the RemoteID implementation, see RemoteID firmware documentation for details. | */
   SECURE_COMMAND_FLASH_BOOTLOADER=7, /* Flash bootloader from local storage. Data is the filename to use for the bootloader. This is intended to be used with MAVFtp to upload a new bootloader to a microSD before flashing. | */
   SECURE_COMMAND_OP_ENUM_END=8, /*  | */
} SECURE_COMMAND_OP;
#endif

/** @brief  */
#ifndef HAVE_ENUM_LIMITS_STATE
#define HAVE_ENUM_LIMITS_STATE
typedef enum LIMITS_STATE
{
   LIMITS_INIT=0, /* Pre-initialization. | */
   LIMITS_DISABLED=1, /* Disabled. | */
   LIMITS_ENABLED=2, /* Checking limits. | */
   LIMITS_TRIGGERED=3, /* A limit has been breached. | */
   LIMITS_RECOVERING=4, /* Taking action e.g. Return/RTL. | */
   LIMITS_RECOVERED=5, /* We're no longer in breach of a limit. | */
   LIMITS_STATE_ENUM_END=6, /*  | */
} LIMITS_STATE;
#endif

/** @brief  */
#ifndef HAVE_ENUM_LIMIT_MODULE
#define HAVE_ENUM_LIMIT_MODULE
typedef enum LIMIT_MODULE
{
   LIMIT_GPSLOCK=1, /* Pre-initialization. | */
   LIMIT_GEOFENCE=2, /* Disabled. | */
   LIMIT_ALTITUDE=4, /* Checking limits. | */
   LIMIT_MODULE_ENUM_END=5, /*  | */
} LIMIT_MODULE;
#endif

/** @brief Flags in RALLY_POINT message. */
#ifndef HAVE_ENUM_RALLY_FLAGS
#define HAVE_ENUM_RALLY_FLAGS
typedef enum RALLY_FLAGS
{
   FAVORABLE_WIND=1, /* Flag set when requiring favorable winds for landing. | */
   LAND_IMMEDIATELY=2, /* Flag set when plane is to immediately descend to break altitude and land without GCS intervention. Flag not set when plane is to loiter at Rally point until commanded to land. | */
   ALT_FRAME_VALID=4, /* True if the following altitude frame value is valid. | */
   ALT_FRAME=24, /* 2 bit value representing altitude frame. 0: absolute, 1: relative home, 2: relative origin, 3: relative terrain | */
   RALLY_FLAGS_ENUM_END=25, /*  | */
} RALLY_FLAGS;
#endif

/** @brief  */
#ifndef HAVE_ENUM_CAMERA_STATUS_TYPES
#define HAVE_ENUM_CAMERA_STATUS_TYPES
typedef enum CAMERA_STATUS_TYPES
{
   CAMERA_STATUS_TYPE_HEARTBEAT=0, /* Camera heartbeat, announce camera component ID at 1Hz. | */
   CAMERA_STATUS_TYPE_TRIGGER=1, /* Camera image triggered. | */
   CAMERA_STATUS_TYPE_DISCONNECT=2, /* Camera connection lost. | */
   CAMERA_STATUS_TYPE_ERROR=3, /* Camera unknown error. | */
   CAMERA_STATUS_TYPE_LOWBATT=4, /* Camera battery low. Parameter p1 shows reported voltage. | */
   CAMERA_STATUS_TYPE_LOWSTORE=5, /* Camera storage low. Parameter p1 shows reported shots remaining. | */
   CAMERA_STATUS_TYPE_LOWSTOREV=6, /* Camera storage low. Parameter p1 shows reported video minutes remaining. | */
   CAMERA_STATUS_TYPES_ENUM_END=7, /*  | */
} CAMERA_STATUS_TYPES;
#endif

/** @brief  */
#ifndef HAVE_ENUM_CAMERA_FEEDBACK_FLAGS
#define HAVE_ENUM_CAMERA_FEEDBACK_FLAGS
typedef enum CAMERA_FEEDBACK_FLAGS
{
   CAMERA_FEEDBACK_PHOTO=0, /* Shooting photos, not video. | */
   CAMERA_FEEDBACK_VIDEO=1, /* Shooting video, not stills. | */
   CAMERA_FEEDBACK_BADEXPOSURE=2, /* Unable to achieve requested exposure (e.g. shutter speed too low). | */
   CAMERA_FEEDBACK_CLOSEDLOOP=3, /* Closed loop feedback from camera, we know for sure it has successfully taken a picture. | */
   CAMERA_FEEDBACK_OPENLOOP=4, /* Open loop camera, an image trigger has been requested but we can't know for sure it has successfully taken a picture. | */
   CAMERA_FEEDBACK_FLAGS_ENUM_END=5, /*  | */
} CAMERA_FEEDBACK_FLAGS;
#endif

/** @brief  */
#ifndef HAVE_ENUM_MAV_MODE_GIMBAL
#define HAVE_ENUM_MAV_MODE_GIMBAL
typedef enum MAV_MODE_GIMBAL
{
   MAV_MODE_GIMBAL_UNINITIALIZED=0, /* Gimbal is powered on but has not started initializing yet. | */
   MAV_MODE_GIMBAL_CALIBRATING_PITCH=1, /* Gimbal is currently running calibration on the pitch axis. | */
   MAV_MODE_GIMBAL_CALIBRATING_ROLL=2, /* Gimbal is currently running calibration on the roll axis. | */
   MAV_MODE_GIMBAL_CALIBRATING_YAW=3, /* Gimbal is currently running calibration on the yaw axis. | */
   MAV_MODE_GIMBAL_INITIALIZED=4, /* Gimbal has finished calibrating and initializing, but is relaxed pending reception of first rate command from copter. | */
   MAV_MODE_GIMBAL_ACTIVE=5, /* Gimbal is actively stabilizing. | */
   MAV_MODE_GIMBAL_RATE_CMD_TIMEOUT=6, /* Gimbal is relaxed because it missed more than 10 expected rate command messages in a row. Gimbal will move back to active mode when it receives a new rate command. | */
   MAV_MODE_GIMBAL_ENUM_END=7, /*  | */
} MAV_MODE_GIMBAL;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GIMBAL_AXIS
#define HAVE_ENUM_GIMBAL_AXIS
typedef enum GIMBAL_AXIS
{
   GIMBAL_AXIS_YAW=0, /* Gimbal yaw axis. | */
   GIMBAL_AXIS_PITCH=1, /* Gimbal pitch axis. | */
   GIMBAL_AXIS_ROLL=2, /* Gimbal roll axis. | */
   GIMBAL_AXIS_ENUM_END=3, /*  | */
} GIMBAL_AXIS;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GIMBAL_AXIS_CALIBRATION_STATUS
#define HAVE_ENUM_GIMBAL_AXIS_CALIBRATION_STATUS
typedef enum GIMBAL_AXIS_CALIBRATION_STATUS
{
   GIMBAL_AXIS_CALIBRATION_STATUS_IN_PROGRESS=0, /* Axis calibration is in progress. | */
   GIMBAL_AXIS_CALIBRATION_STATUS_SUCCEEDED=1, /* Axis calibration succeeded. | */
   GIMBAL_AXIS_CALIBRATION_STATUS_FAILED=2, /* Axis calibration failed. | */
   GIMBAL_AXIS_CALIBRATION_STATUS_ENUM_END=3, /*  | */
} GIMBAL_AXIS_CALIBRATION_STATUS;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GIMBAL_AXIS_CALIBRATION_REQUIRED
#define HAVE_ENUM_GIMBAL_AXIS_CALIBRATION_REQUIRED
typedef enum GIMBAL_AXIS_CALIBRATION_REQUIRED
{
   GIMBAL_AXIS_CALIBRATION_REQUIRED_UNKNOWN=0, /* Whether or not this axis requires calibration is unknown at this time. | */
   GIMBAL_AXIS_CALIBRATION_REQUIRED_TRUE=1, /* This axis requires calibration. | */
   GIMBAL_AXIS_CALIBRATION_REQUIRED_FALSE=2, /* This axis does not require calibration. | */
   GIMBAL_AXIS_CALIBRATION_REQUIRED_ENUM_END=3, /*  | */
} GIMBAL_AXIS_CALIBRATION_REQUIRED;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_HEARTBEAT_STATUS
#define HAVE_ENUM_GOPRO_HEARTBEAT_STATUS
typedef enum GOPRO_HEARTBEAT_STATUS
{
   GOPRO_HEARTBEAT_STATUS_DISCONNECTED=0, /* No GoPro connected. | */
   GOPRO_HEARTBEAT_STATUS_INCOMPATIBLE=1, /* The detected GoPro is not HeroBus compatible. | */
   GOPRO_HEARTBEAT_STATUS_CONNECTED=2, /* A HeroBus compatible GoPro is connected. | */
   GOPRO_HEARTBEAT_STATUS_ERROR=3, /* An unrecoverable error was encountered with the connected GoPro, it may require a power cycle. | */
   GOPRO_HEARTBEAT_STATUS_ENUM_END=4, /*  | */
} GOPRO_HEARTBEAT_STATUS;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_HEARTBEAT_FLAGS
#define HAVE_ENUM_GOPRO_HEARTBEAT_FLAGS
typedef enum GOPRO_HEARTBEAT_FLAGS
{
   GOPRO_FLAG_RECORDING=1, /* GoPro is currently recording. | */
   GOPRO_HEARTBEAT_FLAGS_ENUM_END=2, /*  | */
} GOPRO_HEARTBEAT_FLAGS;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_REQUEST_STATUS
#define HAVE_ENUM_GOPRO_REQUEST_STATUS
typedef enum GOPRO_REQUEST_STATUS
{
   GOPRO_REQUEST_SUCCESS=0, /* The write message with ID indicated succeeded. | */
   GOPRO_REQUEST_FAILED=1, /* The write message with ID indicated failed. | */
   GOPRO_REQUEST_STATUS_ENUM_END=2, /*  | */
} GOPRO_REQUEST_STATUS;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_COMMAND
#define HAVE_ENUM_GOPRO_COMMAND
typedef enum GOPRO_COMMAND
{
   GOPRO_COMMAND_POWER=0, /* (Get/Set). | */
   GOPRO_COMMAND_CAPTURE_MODE=1, /* (Get/Set). | */
   GOPRO_COMMAND_SHUTTER=2, /* (___/Set). | */
   GOPRO_COMMAND_BATTERY=3, /* (Get/___). | */
   GOPRO_COMMAND_MODEL=4, /* (Get/___). | */
   GOPRO_COMMAND_VIDEO_SETTINGS=5, /* (Get/Set). | */
   GOPRO_COMMAND_LOW_LIGHT=6, /* (Get/Set). | */
   GOPRO_COMMAND_PHOTO_RESOLUTION=7, /* (Get/Set). | */
   GOPRO_COMMAND_PHOTO_BURST_RATE=8, /* (Get/Set). | */
   GOPRO_COMMAND_PROTUNE=9, /* (Get/Set). | */
   GOPRO_COMMAND_PROTUNE_WHITE_BALANCE=10, /* (Get/Set) Hero 3+ Only. | */
   GOPRO_COMMAND_PROTUNE_COLOUR=11, /* (Get/Set) Hero 3+ Only. | */
   GOPRO_COMMAND_PROTUNE_GAIN=12, /* (Get/Set) Hero 3+ Only. | */
   GOPRO_COMMAND_PROTUNE_SHARPNESS=13, /* (Get/Set) Hero 3+ Only. | */
   GOPRO_COMMAND_PROTUNE_EXPOSURE=14, /* (Get/Set) Hero 3+ Only. | */
   GOPRO_COMMAND_TIME=15, /* (Get/Set). | */
   GOPRO_COMMAND_CHARGING=16, /* (Get/Set). | */
   GOPRO_COMMAND_ENUM_END=17, /*  | */
} GOPRO_COMMAND;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_CAPTURE_MODE
#define HAVE_ENUM_GOPRO_CAPTURE_MODE
typedef enum GOPRO_CAPTURE_MODE
{
   GOPRO_CAPTURE_MODE_VIDEO=0, /* Video mode. | */
   GOPRO_CAPTURE_MODE_PHOTO=1, /* Photo mode. | */
   GOPRO_CAPTURE_MODE_BURST=2, /* Burst mode, Hero 3+ only. | */
   GOPRO_CAPTURE_MODE_TIME_LAPSE=3, /* Time lapse mode, Hero 3+ only. | */
   GOPRO_CAPTURE_MODE_MULTI_SHOT=4, /* Multi shot mode, Hero 4 only. | */
   GOPRO_CAPTURE_MODE_PLAYBACK=5, /* Playback mode, Hero 4 only, silver only except when LCD or HDMI is connected to black. | */
   GOPRO_CAPTURE_MODE_SETUP=6, /* Playback mode, Hero 4 only. | */
   GOPRO_CAPTURE_MODE_UNKNOWN=255, /* Mode not yet known. | */
   GOPRO_CAPTURE_MODE_ENUM_END=256, /*  | */
} GOPRO_CAPTURE_MODE;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_RESOLUTION
#define HAVE_ENUM_GOPRO_RESOLUTION
typedef enum GOPRO_RESOLUTION
{
   GOPRO_RESOLUTION_480p=0, /* 848 x 480 (480p). | */
   GOPRO_RESOLUTION_720p=1, /* 1280 x 720 (720p). | */
   GOPRO_RESOLUTION_960p=2, /* 1280 x 960 (960p). | */
   GOPRO_RESOLUTION_1080p=3, /* 1920 x 1080 (1080p). | */
   GOPRO_RESOLUTION_1440p=4, /* 1920 x 1440 (1440p). | */
   GOPRO_RESOLUTION_2_7k_17_9=5, /* 2704 x 1440 (2.7k-17:9). | */
   GOPRO_RESOLUTION_2_7k_16_9=6, /* 2704 x 1524 (2.7k-16:9). | */
   GOPRO_RESOLUTION_2_7k_4_3=7, /* 2704 x 2028 (2.7k-4:3). | */
   GOPRO_RESOLUTION_4k_16_9=8, /* 3840 x 2160 (4k-16:9). | */
   GOPRO_RESOLUTION_4k_17_9=9, /* 4096 x 2160 (4k-17:9). | */
   GOPRO_RESOLUTION_720p_SUPERVIEW=10, /* 1280 x 720 (720p-SuperView). | */
   GOPRO_RESOLUTION_1080p_SUPERVIEW=11, /* 1920 x 1080 (1080p-SuperView). | */
   GOPRO_RESOLUTION_2_7k_SUPERVIEW=12, /* 2704 x 1520 (2.7k-SuperView). | */
   GOPRO_RESOLUTION_4k_SUPERVIEW=13, /* 3840 x 2160 (4k-SuperView). | */
   GOPRO_RESOLUTION_ENUM_END=14, /*  | */
} GOPRO_RESOLUTION;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_FRAME_RATE
#define HAVE_ENUM_GOPRO_FRAME_RATE
typedef enum GOPRO_FRAME_RATE
{
   GOPRO_FRAME_RATE_12=0, /* 12 FPS. | */
   GOPRO_FRAME_RATE_15=1, /* 15 FPS. | */
   GOPRO_FRAME_RATE_24=2, /* 24 FPS. | */
   GOPRO_FRAME_RATE_25=3, /* 25 FPS. | */
   GOPRO_FRAME_RATE_30=4, /* 30 FPS. | */
   GOPRO_FRAME_RATE_48=5, /* 48 FPS. | */
   GOPRO_FRAME_RATE_50=6, /* 50 FPS. | */
   GOPRO_FRAME_RATE_60=7, /* 60 FPS. | */
   GOPRO_FRAME_RATE_80=8, /* 80 FPS. | */
   GOPRO_FRAME_RATE_90=9, /* 90 FPS. | */
   GOPRO_FRAME_RATE_100=10, /* 100 FPS. | */
   GOPRO_FRAME_RATE_120=11, /* 120 FPS. | */
   GOPRO_FRAME_RATE_240=12, /* 240 FPS. | */
   GOPRO_FRAME_RATE_12_5=13, /* 12.5 FPS. | */
   GOPRO_FRAME_RATE_ENUM_END=14, /*  | */
} GOPRO_FRAME_RATE;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_FIELD_OF_VIEW
#define HAVE_ENUM_GOPRO_FIELD_OF_VIEW
typedef enum GOPRO_FIELD_OF_VIEW
{
   GOPRO_FIELD_OF_VIEW_WIDE=0, /* 0x00: Wide. | */
   GOPRO_FIELD_OF_VIEW_MEDIUM=1, /* 0x01: Medium. | */
   GOPRO_FIELD_OF_VIEW_NARROW=2, /* 0x02: Narrow. | */
   GOPRO_FIELD_OF_VIEW_ENUM_END=3, /*  | */
} GOPRO_FIELD_OF_VIEW;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_VIDEO_SETTINGS_FLAGS
#define HAVE_ENUM_GOPRO_VIDEO_SETTINGS_FLAGS
typedef enum GOPRO_VIDEO_SETTINGS_FLAGS
{
   GOPRO_VIDEO_SETTINGS_TV_MODE=1, /* 0=NTSC, 1=PAL. | */
   GOPRO_VIDEO_SETTINGS_FLAGS_ENUM_END=2, /*  | */
} GOPRO_VIDEO_SETTINGS_FLAGS;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_PHOTO_RESOLUTION
#define HAVE_ENUM_GOPRO_PHOTO_RESOLUTION
typedef enum GOPRO_PHOTO_RESOLUTION
{
   GOPRO_PHOTO_RESOLUTION_5MP_MEDIUM=0, /* 5MP Medium. | */
   GOPRO_PHOTO_RESOLUTION_7MP_MEDIUM=1, /* 7MP Medium. | */
   GOPRO_PHOTO_RESOLUTION_7MP_WIDE=2, /* 7MP Wide. | */
   GOPRO_PHOTO_RESOLUTION_10MP_WIDE=3, /* 10MP Wide. | */
   GOPRO_PHOTO_RESOLUTION_12MP_WIDE=4, /* 12MP Wide. | */
   GOPRO_PHOTO_RESOLUTION_ENUM_END=5, /*  | */
} GOPRO_PHOTO_RESOLUTION;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_PROTUNE_WHITE_BALANCE
#define HAVE_ENUM_GOPRO_PROTUNE_WHITE_BALANCE
typedef enum GOPRO_PROTUNE_WHITE_BALANCE
{
   GOPRO_PROTUNE_WHITE_BALANCE_AUTO=0, /* Auto. | */
   GOPRO_PROTUNE_WHITE_BALANCE_3000K=1, /* 3000K. | */
   GOPRO_PROTUNE_WHITE_BALANCE_5500K=2, /* 5500K. | */
   GOPRO_PROTUNE_WHITE_BALANCE_6500K=3, /* 6500K. | */
   GOPRO_PROTUNE_WHITE_BALANCE_RAW=4, /* Camera Raw. | */
   GOPRO_PROTUNE_WHITE_BALANCE_ENUM_END=5, /*  | */
} GOPRO_PROTUNE_WHITE_BALANCE;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_PROTUNE_COLOUR
#define HAVE_ENUM_GOPRO_PROTUNE_COLOUR
typedef enum GOPRO_PROTUNE_COLOUR
{
   GOPRO_PROTUNE_COLOUR_STANDARD=0, /* Auto. | */
   GOPRO_PROTUNE_COLOUR_NEUTRAL=1, /* Neutral. | */
   GOPRO_PROTUNE_COLOUR_ENUM_END=2, /*  | */
} GOPRO_PROTUNE_COLOUR;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_PROTUNE_GAIN
#define HAVE_ENUM_GOPRO_PROTUNE_GAIN
typedef enum GOPRO_PROTUNE_GAIN
{
   GOPRO_PROTUNE_GAIN_400=0, /* ISO 400. | */
   GOPRO_PROTUNE_GAIN_800=1, /* ISO 800 (Only Hero 4). | */
   GOPRO_PROTUNE_GAIN_1600=2, /* ISO 1600. | */
   GOPRO_PROTUNE_GAIN_3200=3, /* ISO 3200 (Only Hero 4). | */
   GOPRO_PROTUNE_GAIN_6400=4, /* ISO 6400. | */
   GOPRO_PROTUNE_GAIN_ENUM_END=5, /*  | */
} GOPRO_PROTUNE_GAIN;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_PROTUNE_SHARPNESS
#define HAVE_ENUM_GOPRO_PROTUNE_SHARPNESS
typedef enum GOPRO_PROTUNE_SHARPNESS
{
   GOPRO_PROTUNE_SHARPNESS_LOW=0, /* Low Sharpness. | */
   GOPRO_PROTUNE_SHARPNESS_MEDIUM=1, /* Medium Sharpness. | */
   GOPRO_PROTUNE_SHARPNESS_HIGH=2, /* High Sharpness. | */
   GOPRO_PROTUNE_SHARPNESS_ENUM_END=3, /*  | */
} GOPRO_PROTUNE_SHARPNESS;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_PROTUNE_EXPOSURE
#define HAVE_ENUM_GOPRO_PROTUNE_EXPOSURE
typedef enum GOPRO_PROTUNE_EXPOSURE
{
   GOPRO_PROTUNE_EXPOSURE_NEG_5_0=0, /* -5.0 EV (Hero 3+ Only). | */
   GOPRO_PROTUNE_EXPOSURE_NEG_4_5=1, /* -4.5 EV (Hero 3+ Only). | */
   GOPRO_PROTUNE_EXPOSURE_NEG_4_0=2, /* -4.0 EV (Hero 3+ Only). | */
   GOPRO_PROTUNE_EXPOSURE_NEG_3_5=3, /* -3.5 EV (Hero 3+ Only). | */
   GOPRO_PROTUNE_EXPOSURE_NEG_3_0=4, /* -3.0 EV (Hero 3+ Only). | */
   GOPRO_PROTUNE_EXPOSURE_NEG_2_5=5, /* -2.5 EV (Hero 3+ Only). | */
   GOPRO_PROTUNE_EXPOSURE_NEG_2_0=6, /* -2.0 EV. | */
   GOPRO_PROTUNE_EXPOSURE_NEG_1_5=7, /* -1.5 EV. | */
   GOPRO_PROTUNE_EXPOSURE_NEG_1_0=8, /* -1.0 EV. | */
   GOPRO_PROTUNE_EXPOSURE_NEG_0_5=9, /* -0.5 EV. | */
   GOPRO_PROTUNE_EXPOSURE_ZERO=10, /* 0.0 EV. | */
   GOPRO_PROTUNE_EXPOSURE_POS_0_5=11, /* +0.5 EV. | */
   GOPRO_PROTUNE_EXPOSURE_POS_1_0=12, /* +1.0 EV. | */
   GOPRO_PROTUNE_EXPOSURE_POS_1_5=13, /* +1.5 EV. | */
   GOPRO_PROTUNE_EXPOSURE_POS_2_0=14, /* +2.0 EV. | */
   GOPRO_PROTUNE_EXPOSURE_POS_2_5=15, /* +2.5 EV (Hero 3+ Only). | */
   GOPRO_PROTUNE_EXPOSURE_POS_3_0=16, /* +3.0 EV (Hero 3+ Only). | */
   GOPRO_PROTUNE_EXPOSURE_POS_3_5=17, /* +3.5 EV (Hero 3+ Only). | */
   GOPRO_PROTUNE_EXPOSURE_POS_4_0=18, /* +4.0 EV (Hero 3+ Only). | */
   GOPRO_PROTUNE_EXPOSURE_POS_4_5=19, /* +4.5 EV (Hero 3+ Only). | */
   GOPRO_PROTUNE_EXPOSURE_POS_5_0=20, /* +5.0 EV (Hero 3+ Only). | */
   GOPRO_PROTUNE_EXPOSURE_ENUM_END=21, /*  | */
} GOPRO_PROTUNE_EXPOSURE;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_CHARGING
#define HAVE_ENUM_GOPRO_CHARGING
typedef enum GOPRO_CHARGING
{
   GOPRO_CHARGING_DISABLED=0, /* Charging disabled. | */
   GOPRO_CHARGING_ENABLED=1, /* Charging enabled. | */
   GOPRO_CHARGING_ENUM_END=2, /*  | */
} GOPRO_CHARGING;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_MODEL
#define HAVE_ENUM_GOPRO_MODEL
typedef enum GOPRO_MODEL
{
   GOPRO_MODEL_UNKNOWN=0, /* Unknown gopro model. | */
   GOPRO_MODEL_HERO_3_PLUS_SILVER=1, /* Hero 3+ Silver (HeroBus not supported by GoPro). | */
   GOPRO_MODEL_HERO_3_PLUS_BLACK=2, /* Hero 3+ Black. | */
   GOPRO_MODEL_HERO_4_SILVER=3, /* Hero 4 Silver. | */
   GOPRO_MODEL_HERO_4_BLACK=4, /* Hero 4 Black. | */
   GOPRO_MODEL_ENUM_END=5, /*  | */
} GOPRO_MODEL;
#endif

/** @brief  */
#ifndef HAVE_ENUM_GOPRO_BURST_RATE
#define HAVE_ENUM_GOPRO_BURST_RATE
typedef enum GOPRO_BURST_RATE
{
   GOPRO_BURST_RATE_3_IN_1_SECOND=0, /* 3 Shots / 1 Second. | */
   GOPRO_BURST_RATE_5_IN_1_SECOND=1, /* 5 Shots / 1 Second. | */
   GOPRO_BURST_RATE_10_IN_1_SECOND=2, /* 10 Shots / 1 Second. | */
   GOPRO_BURST_RATE_10_IN_2_SECOND=3, /* 10 Shots / 2 Second. | */
   GOPRO_BURST_RATE_10_IN_3_SECOND=4, /* 10 Shots / 3 Second (Hero 4 Only). | */
   GOPRO_BURST_RATE_30_IN_1_SECOND=5, /* 30 Shots / 1 Second. | */
   GOPRO_BURST_RATE_30_IN_2_SECOND=6, /* 30 Shots / 2 Second. | */
   GOPRO_BURST_RATE_30_IN_3_SECOND=7, /* 30 Shots / 3 Second. | */
   GOPRO_BURST_RATE_30_IN_6_SECOND=8, /* 30 Shots / 6 Second. | */
   GOPRO_BURST_RATE_ENUM_END=9, /*  | */
} GOPRO_BURST_RATE;
#endif

/** @brief  */
#ifndef HAVE_ENUM_MAV_CMD_DO_AUX_FUNCTION_SWITCH_LEVEL
#define HAVE_ENUM_MAV_CMD_DO_AUX_FUNCTION_SWITCH_LEVEL
typedef enum MAV_CMD_DO_AUX_FUNCTION_SWITCH_LEVEL
{
   MAV_CMD_DO_AUX_FUNCTION_SWITCH_LEVEL_LOW=0, /* Switch Low. |Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_AUX_FUNCTION_SWITCH_LEVEL_MIDDLE=1, /* Switch Middle. |Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_AUX_FUNCTION_SWITCH_LEVEL_HIGH=2, /* Switch High. |Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
   MAV_CMD_DO_AUX_FUNCTION_SWITCH_LEVEL_ENUM_END=3, /*  | */
} MAV_CMD_DO_AUX_FUNCTION_SWITCH_LEVEL;
#endif

/** @brief  */
#ifndef HAVE_ENUM_LED_CONTROL_PATTERN
#define HAVE_ENUM_LED_CONTROL_PATTERN
typedef enum LED_CONTROL_PATTERN
{
   LED_CONTROL_PATTERN_OFF=0, /* LED patterns off (return control to regular vehicle control). | */
   LED_CONTROL_PATTERN_FIRMWAREUPDATE=1, /* LEDs show pattern during firmware update. | */
   LED_CONTROL_PATTERN_CUSTOM=255, /* Custom Pattern using custom bytes fields. | */
   LED_CONTROL_PATTERN_ENUM_END=256, /*  | */
} LED_CONTROL_PATTERN;
#endif

/** @brief Flags in EKF_STATUS message. */
#ifndef HAVE_ENUM_EKF_STATUS_FLAGS
#define HAVE_ENUM_EKF_STATUS_FLAGS
typedef enum EKF_STATUS_FLAGS
{
   EKF_ATTITUDE=1, /* Set if EKF's attitude estimate is good. | */
   EKF_VELOCITY_HORIZ=2, /* Set if EKF's horizontal velocity estimate is good. | */
   EKF_VELOCITY_VERT=4, /* Set if EKF's vertical velocity estimate is good. | */
   EKF_POS_HORIZ_REL=8, /* Set if EKF's horizontal position (relative) estimate is good. | */
   EKF_POS_HORIZ_ABS=16, /* Set if EKF's horizontal position (absolute) estimate is good. | */
   EKF_POS_VERT_ABS=32, /* Set if EKF's vertical position (absolute) estimate is good. | */
   EKF_POS_VERT_AGL=64, /* Set if EKF's vertical position (above ground) estimate is good. | */
   EKF_CONST_POS_MODE=128, /* EKF is in constant position mode and does not know it's absolute or relative position. | */
   EKF_PRED_POS_HORIZ_REL=256, /* Set if EKF's predicted horizontal position (relative) estimate is good. | */
   EKF_PRED_POS_HORIZ_ABS=512, /* Set if EKF's predicted horizontal position (absolute) estimate is good. | */
   EKF_UNINITIALIZED=1024, /* Set if EKF has never been healthy. | */
   EKF_GPS_GLITCHING=32768, /* Set if EKF believes the GPS input data is faulty. | */
   EKF_STATUS_FLAGS_ENUM_END=32769, /*  | */
} EKF_STATUS_FLAGS;
#endif

/** @brief  */
#ifndef HAVE_ENUM_PID_TUNING_AXIS
#define HAVE_ENUM_PID_TUNING_AXIS
typedef enum PID_TUNING_AXIS
{
   PID_TUNING_ROLL=1, /*  | */
   PID_TUNING_PITCH=2, /*  | */
   PID_TUNING_YAW=3, /*  | */
   PID_TUNING_ACCZ=4, /*  | */
   PID_TUNING_STEER=5, /*  | */
   PID_TUNING_LANDING=6, /*  | */
   PID_TUNING_AXIS_ENUM_END=7, /*  | */
} PID_TUNING_AXIS;
#endif

/** @brief Special ACK block numbers control activation of dataflash log streaming. */
#ifndef HAVE_ENUM_MAV_REMOTE_LOG_DATA_BLOCK_COMMANDS
#define HAVE_ENUM_MAV_REMOTE_LOG_DATA_BLOCK_COMMANDS
typedef enum MAV_REMOTE_LOG_DATA_BLOCK_COMMANDS
{
   MAV_REMOTE_LOG_DATA_BLOCK_STOP=2147483645, /* UAV to stop sending DataFlash blocks. | */
   MAV_REMOTE_LOG_DATA_BLOCK_START=2147483646, /* UAV to start sending DataFlash blocks. | */
   MAV_REMOTE_LOG_DATA_BLOCK_COMMANDS_ENUM_END=2147483647, /*  | */
} MAV_REMOTE_LOG_DATA_BLOCK_COMMANDS;
#endif

/** @brief Possible remote log data block statuses. */
#ifndef HAVE_ENUM_MAV_REMOTE_LOG_DATA_BLOCK_STATUSES
#define HAVE_ENUM_MAV_REMOTE_LOG_DATA_BLOCK_STATUSES
typedef enum MAV_REMOTE_LOG_DATA_BLOCK_STATUSES
{
   MAV_REMOTE_LOG_DATA_BLOCK_NACK=0, /* This block has NOT been received. | */
   MAV_REMOTE_LOG_DATA_BLOCK_ACK=1, /* This block has been received. | */
   MAV_REMOTE_LOG_DATA_BLOCK_STATUSES_ENUM_END=2, /*  | */
} MAV_REMOTE_LOG_DATA_BLOCK_STATUSES;
#endif

/** @brief Bus types for device operations. */
#ifndef HAVE_ENUM_DEVICE_OP_BUSTYPE
#define HAVE_ENUM_DEVICE_OP_BUSTYPE
typedef enum DEVICE_OP_BUSTYPE
{
   DEVICE_OP_BUSTYPE_I2C=0, /* I2C Device operation. | */
   DEVICE_OP_BUSTYPE_SPI=1, /* SPI Device operation. | */
   DEVICE_OP_BUSTYPE_ENUM_END=2, /*  | */
} DEVICE_OP_BUSTYPE;
#endif

/** @brief Deepstall flight stage. */
#ifndef HAVE_ENUM_DEEPSTALL_STAGE
#define HAVE_ENUM_DEEPSTALL_STAGE
typedef enum DEEPSTALL_STAGE
{
   DEEPSTALL_STAGE_FLY_TO_LANDING=0, /* Flying to the landing point. | */
   DEEPSTALL_STAGE_ESTIMATE_WIND=1, /* Building an estimate of the wind. | */
   DEEPSTALL_STAGE_WAIT_FOR_BREAKOUT=2, /* Waiting to breakout of the loiter to fly the approach. | */
   DEEPSTALL_STAGE_FLY_TO_ARC=3, /* Flying to the first arc point to turn around to the landing point. | */
   DEEPSTALL_STAGE_ARC=4, /* Turning around back to the deepstall landing point. | */
   DEEPSTALL_STAGE_APPROACH=5, /* Approaching the landing point. | */
   DEEPSTALL_STAGE_LAND=6, /* Stalling and steering towards the land point. | */
   DEEPSTALL_STAGE_ENUM_END=7, /*  | */
} DEEPSTALL_STAGE;
#endif

/** @brief A mapping of plane flight modes for custom_mode field of heartbeat. */
#ifndef HAVE_ENUM_PLANE_MODE
#define HAVE_ENUM_PLANE_MODE
typedef enum PLANE_MODE
{
   PLANE_MODE_MANUAL=0, /*  | */
   PLANE_MODE_CIRCLE=1, /*  | */
   PLANE_MODE_STABILIZE=2, /*  | */
   PLANE_MODE_TRAINING=3, /*  | */
   PLANE_MODE_ACRO=4, /*  | */
   PLANE_MODE_FLY_BY_WIRE_A=5, /*  | */
   PLANE_MODE_FLY_BY_WIRE_B=6, /*  | */
   PLANE_MODE_CRUISE=7, /*  | */
   PLANE_MODE_AUTOTUNE=8, /*  | */
   PLANE_MODE_AUTO=10, /*  | */
   PLANE_MODE_RTL=11, /*  | */
   PLANE_MODE_LOITER=12, /*  | */
   PLANE_MODE_TAKEOFF=13, /*  | */
   PLANE_MODE_AVOID_ADSB=14, /*  | */
   PLANE_MODE_GUIDED=15, /*  | */
   PLANE_MODE_INITIALIZING=16, /*  | */
   PLANE_MODE_QSTABILIZE=17, /*  | */
   PLANE_MODE_QHOVER=18, /*  | */
   PLANE_MODE_QLOITER=19, /*  | */
   PLANE_MODE_QLAND=20, /*  | */
   PLANE_MODE_QRTL=21, /*  | */
   PLANE_MODE_QAUTOTUNE=22, /*  | */
   PLANE_MODE_QACRO=23, /*  | */
   PLANE_MODE_THERMAL=24, /*  | */
   PLANE_MODE_ENUM_END=25, /*  | */
} PLANE_MODE;
#endif

/** @brief A mapping of copter flight modes for custom_mode field of heartbeat. */
#ifndef HAVE_ENUM_COPTER_MODE
#define HAVE_ENUM_COPTER_MODE
typedef enum COPTER_MODE
{
   COPTER_MODE_STABILIZE=0, /*  | */
   COPTER_MODE_ACRO=1, /*  | */
   COPTER_MODE_ALT_HOLD=2, /*  | */
   COPTER_MODE_AUTO=3, /*  | */
   COPTER_MODE_GUIDED=4, /*  | */
   COPTER_MODE_LOITER=5, /*  | */
   COPTER_MODE_RTL=6, /*  | */
   COPTER_MODE_CIRCLE=7, /*  | */
   COPTER_MODE_LAND=9, /*  | */
   COPTER_MODE_DRIFT=11, /*  | */
   COPTER_MODE_SPORT=13, /*  | */
   COPTER_MODE_FLIP=14, /*  | */
   COPTER_MODE_AUTOTUNE=15, /*  | */
   COPTER_MODE_POSHOLD=16, /*  | */
   COPTER_MODE_BRAKE=17, /*  | */
   COPTER_MODE_THROW=18, /*  | */
   COPTER_MODE_AVOID_ADSB=19, /*  | */
   COPTER_MODE_GUIDED_NOGPS=20, /*  | */
   COPTER_MODE_SMART_RTL=21, /*  | */
   COPTER_MODE_FLOWHOLD=22, /*  | */
   COPTER_MODE_FOLLOW=23, /*  | */
   COPTER_MODE_ZIGZAG=24, /*  | */
   COPTER_MODE_SYSTEMID=25, /*  | */
   COPTER_MODE_AUTOROTATE=26, /*  | */
   COPTER_MODE_AUTO_RTL=27, /*  | */
   COPTER_MODE_ENUM_END=28, /*  | */
} COPTER_MODE;
#endif

/** @brief A mapping of sub flight modes for custom_mode field of heartbeat. */
#ifndef HAVE_ENUM_SUB_MODE
#define HAVE_ENUM_SUB_MODE
typedef enum SUB_MODE
{
   SUB_MODE_STABILIZE=0, /*  | */
   SUB_MODE_ACRO=1, /*  | */
   SUB_MODE_ALT_HOLD=2, /*  | */
   SUB_MODE_AUTO=3, /*  | */
   SUB_MODE_GUIDED=4, /*  | */
   SUB_MODE_CIRCLE=7, /*  | */
   SUB_MODE_SURFACE=9, /*  | */
   SUB_MODE_POSHOLD=16, /*  | */
   SUB_MODE_MANUAL=19, /*  | */
   SUB_MODE_ENUM_END=20, /*  | */
} SUB_MODE;
#endif

/** @brief A mapping of rover flight modes for custom_mode field of heartbeat. */
#ifndef HAVE_ENUM_ROVER_MODE
#define HAVE_ENUM_ROVER_MODE
typedef enum ROVER_MODE
{
   ROVER_MODE_MANUAL=0, /*  | */
   ROVER_MODE_ACRO=1, /*  | */
   ROVER_MODE_STEERING=3, /*  | */
   ROVER_MODE_HOLD=4, /*  | */
   ROVER_MODE_LOITER=5, /*  | */
   ROVER_MODE_FOLLOW=6, /*  | */
   ROVER_MODE_SIMPLE=7, /*  | */
   ROVER_MODE_AUTO=10, /*  | */
   ROVER_MODE_RTL=11, /*  | */
   ROVER_MODE_SMART_RTL=12, /*  | */
   ROVER_MODE_GUIDED=15, /*  | */
   ROVER_MODE_INITIALIZING=16, /*  | */
   ROVER_MODE_ENUM_END=17, /*  | */
} ROVER_MODE;
#endif

/** @brief A mapping of antenna tracker flight modes for custom_mode field of heartbeat. */
#ifndef HAVE_ENUM_TRACKER_MODE
#define HAVE_ENUM_TRACKER_MODE
typedef enum TRACKER_MODE
{
   TRACKER_MODE_MANUAL=0, /*  | */
   TRACKER_MODE_STOP=1, /*  | */
   TRACKER_MODE_SCAN=2, /*  | */
   TRACKER_MODE_SERVO_TEST=3, /*  | */
   TRACKER_MODE_AUTO=10, /*  | */
   TRACKER_MODE_INITIALIZING=16, /*  | */
   TRACKER_MODE_ENUM_END=17, /*  | */
} TRACKER_MODE;
#endif

/** @brief The type of parameter for the OSD parameter editor. */
#ifndef HAVE_ENUM_OSD_PARAM_CONFIG_TYPE
#define HAVE_ENUM_OSD_PARAM_CONFIG_TYPE
typedef enum OSD_PARAM_CONFIG_TYPE
{
   OSD_PARAM_NONE=0, /*  | */
   OSD_PARAM_SERIAL_PROTOCOL=1, /*  | */
   OSD_PARAM_SERVO_FUNCTION=2, /*  | */
   OSD_PARAM_AUX_FUNCTION=3, /*  | */
   OSD_PARAM_FLIGHT_MODE=4, /*  | */
   OSD_PARAM_FAILSAFE_ACTION=5, /*  | */
   OSD_PARAM_FAILSAFE_ACTION_1=6, /*  | */
   OSD_PARAM_FAILSAFE_ACTION_2=7, /*  | */
   OSD_PARAM_NUM_TYPES=8, /*  | */
   OSD_PARAM_CONFIG_TYPE_ENUM_END=9, /*  | */
} OSD_PARAM_CONFIG_TYPE;
#endif

/** @brief The error type for the OSD parameter editor. */
#ifndef HAVE_ENUM_OSD_PARAM_CONFIG_ERROR
#define HAVE_ENUM_OSD_PARAM_CONFIG_ERROR
typedef enum OSD_PARAM_CONFIG_ERROR
{
   OSD_PARAM_SUCCESS=0, /*  | */
   OSD_PARAM_INVALID_SCREEN=1, /*  | */
   OSD_PARAM_INVALID_PARAMETER_INDEX=2, /*  | */
   OSD_PARAM_INVALID_PARAMETER=3, /*  | */
   OSD_PARAM_CONFIG_ERROR_ENUM_END=4, /*  | */
} OSD_PARAM_CONFIG_ERROR;
#endif

// MAVLINK VERSION

#ifndef MAVLINK_VERSION
#define MAVLINK_VERSION 2
#endif

#if (MAVLINK_VERSION == 0)
#undef MAVLINK_VERSION
#define MAVLINK_VERSION 2
#endif

// MESSAGE DEFINITIONS
#include "./mavlink_msg_sensor_offsets.h"
#include "./mavlink_msg_set_mag_offsets.h"
#include "./mavlink_msg_meminfo.h"
#include "./mavlink_msg_ap_adc.h"
#include "./mavlink_msg_digicam_configure.h"
#include "./mavlink_msg_digicam_control.h"
#include "./mavlink_msg_mount_configure.h"
#include "./mavlink_msg_mount_control.h"
#include "./mavlink_msg_mount_status.h"
#include "./mavlink_msg_fence_point.h"
#include "./mavlink_msg_fence_fetch_point.h"
#include "./mavlink_msg_ahrs.h"
#include "./mavlink_msg_simstate.h"
#include "./mavlink_msg_hwstatus.h"
#include "./mavlink_msg_radio.h"
#include "./mavlink_msg_limits_status.h"
#include "./mavlink_msg_wind.h"
#include "./mavlink_msg_data16.h"
#include "./mavlink_msg_data32.h"
#include "./mavlink_msg_data64.h"
#include "./mavlink_msg_data96.h"
#include "./mavlink_msg_rangefinder.h"
#include "./mavlink_msg_airspeed_autocal.h"
#include "./mavlink_msg_rally_point.h"
#include "./mavlink_msg_rally_fetch_point.h"
#include "./mavlink_msg_compassmot_status.h"
#include "./mavlink_msg_ahrs2.h"
#include "./mavlink_msg_camera_status.h"
#include "./mavlink_msg_camera_feedback.h"
#include "./mavlink_msg_battery2.h"
#include "./mavlink_msg_ahrs3.h"
#include "./mavlink_msg_autopilot_version_request.h"
#include "./mavlink_msg_remote_log_data_block.h"
#include "./mavlink_msg_remote_log_block_status.h"
#include "./mavlink_msg_led_control.h"
#include "./mavlink_msg_mag_cal_progress.h"
#include "./mavlink_msg_ekf_status_report.h"
#include "./mavlink_msg_pid_tuning.h"
#include "./mavlink_msg_deepstall.h"
#include "./mavlink_msg_gimbal_report.h"
#include "./mavlink_msg_gimbal_control.h"
#include "./mavlink_msg_gimbal_torque_cmd_report.h"
#include "./mavlink_msg_gopro_heartbeat.h"
#include "./mavlink_msg_gopro_get_request.h"
#include "./mavlink_msg_gopro_get_response.h"
#include "./mavlink_msg_gopro_set_request.h"
#include "./mavlink_msg_gopro_set_response.h"
#include "./mavlink_msg_rpm.h"
#include "./mavlink_msg_device_op_read.h"
#include "./mavlink_msg_device_op_read_reply.h"
#include "./mavlink_msg_device_op_write.h"
#include "./mavlink_msg_device_op_write_reply.h"
#include "./mavlink_msg_secure_command.h"
#include "./mavlink_msg_secure_command_reply.h"
#include "./mavlink_msg_adap_tuning.h"
#include "./mavlink_msg_vision_position_delta.h"
#include "./mavlink_msg_aoa_ssa.h"
#include "./mavlink_msg_esc_telemetry_1_to_4.h"
#include "./mavlink_msg_esc_telemetry_5_to_8.h"
#include "./mavlink_msg_esc_telemetry_9_to_12.h"
#include "./mavlink_msg_osd_param_config.h"
#include "./mavlink_msg_osd_param_config_reply.h"
#include "./mavlink_msg_osd_param_show_config.h"
#include "./mavlink_msg_osd_param_show_config_reply.h"
#include "./mavlink_msg_obstacle_distance_3d.h"
#include "./mavlink_msg_water_depth.h"
#include "./mavlink_msg_mcu_status.h"
#include "./mavlink_msg_esc_telemetry_13_to_16.h"
#include "./mavlink_msg_esc_telemetry_17_to_20.h"
#include "./mavlink_msg_esc_telemetry_21_to_24.h"
#include "./mavlink_msg_esc_telemetry_25_to_28.h"
#include "./mavlink_msg_esc_telemetry_29_to_32.h"

// base include
#include "../common/common.h"
#include "../uAvionix/uAvionix.h"
#include "../icarous/icarous.h"
#include "../loweheiser/loweheiser.h"
#include "../cubepilot/cubepilot.h"
#include "../csAirLink/csAirLink.h"


#if MAVLINK_ARDUPILOTMEGA_XML_HASH == MAVLINK_PRIMARY_XML_HASH
# define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, MAVLINK_MESSAGE_INFO_SET_MODE, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_PARAM_MAP_RC, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION_COV, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT_COV, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_COV, MAVLINK_MESSAGE_INFO_RC_CHANNELS, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, MAVLINK_MESSAGE_INFO_MISSION_ITEM_INT, MAVLINK_MESSAGE_INFO_VFR_HUD, MAVLINK_MESSAGE_INFO_COMMAND_INT, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, MAVLINK_MESSAGE_INFO_SET_ATTITUDE_TARGET, MAVLINK_MESSAGE_INFO_ATTITUDE_TARGET, MAVLINK_MESSAGE_INFO_SET_POSITION_TARGET_LOCAL_NED, MAVLINK_MESSAGE_INFO_POSITION_TARGET_LOCAL_NED, MAVLINK_MESSAGE_INFO_SET_POSITION_TARGET_GLOBAL_INT, MAVLINK_MESSAGE_INFO_POSITION_TARGET_GLOBAL_INT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, MAVLINK_MESSAGE_INFO_HIL_ACTUATOR_CONTROLS, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW_RAD, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_PROTOCOL, MAVLINK_MESSAGE_INFO_TIMESYNC, MAVLINK_MESSAGE_INFO_CAMERA_TRIGGER, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, MAVLINK_MESSAGE_INFO_POWER_STATUS, MAVLINK_MESSAGE_INFO_SERIAL_CONTROL, MAVLINK_MESSAGE_INFO_GPS_RTK, MAVLINK_MESSAGE_INFO_GPS2_RTK, MAVLINK_MESSAGE_INFO_SCALED_IMU3, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, MAVLINK_MESSAGE_INFO_DISTANCE_SENSOR, MAVLINK_MESSAGE_INFO_TERRAIN_REQUEST, MAVLINK_MESSAGE_INFO_TERRAIN_DATA, MAVLINK_MESSAGE_INFO_TERRAIN_CHECK, MAVLINK_MESSAGE_INFO_TERRAIN_REPORT, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE2, MAVLINK_MESSAGE_INFO_ATT_POS_MOCAP, MAVLINK_MESSAGE_INFO_SET_ACTUATOR_CONTROL_TARGET, MAVLINK_MESSAGE_INFO_ACTUATOR_CONTROL_TARGET, MAVLINK_MESSAGE_INFO_ALTITUDE, MAVLINK_MESSAGE_INFO_RESOURCE_REQUEST, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE3, MAVLINK_MESSAGE_INFO_FOLLOW_TARGET, MAVLINK_MESSAGE_INFO_CONTROL_SYSTEM_STATE, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_AUTOPILOT_VERSION, MAVLINK_MESSAGE_INFO_LANDING_TARGET, MAVLINK_MESSAGE_INFO_SENSOR_OFFSETS, MAVLINK_MESSAGE_INFO_SET_MAG_OFFSETS, MAVLINK_MESSAGE_INFO_MEMINFO, MAVLINK_MESSAGE_INFO_AP_ADC, MAVLINK_MESSAGE_INFO_DIGICAM_CONFIGURE, MAVLINK_MESSAGE_INFO_DIGICAM_CONTROL, MAVLINK_MESSAGE_INFO_MOUNT_CONFIGURE, MAVLINK_MESSAGE_INFO_MOUNT_CONTROL, MAVLINK_MESSAGE_INFO_MOUNT_STATUS, MAVLINK_MESSAGE_INFO_FENCE_POINT, MAVLINK_MESSAGE_INFO_FENCE_FETCH_POINT, MAVLINK_MESSAGE_INFO_FENCE_STATUS, MAVLINK_MESSAGE_INFO_AHRS, MAVLINK_MESSAGE_INFO_SIMSTATE, MAVLINK_MESSAGE_INFO_HWSTATUS, MAVLINK_MESSAGE_INFO_RADIO, MAVLINK_MESSAGE_INFO_LIMITS_STATUS, MAVLINK_MESSAGE_INFO_WIND, MAVLINK_MESSAGE_INFO_DATA16, MAVLINK_MESSAGE_INFO_DATA32, MAVLINK_MESSAGE_INFO_DATA64, MAVLINK_MESSAGE_INFO_DATA96, MAVLINK_MESSAGE_INFO_RANGEFINDER, MAVLINK_MESSAGE_INFO_AIRSPEED_AUTOCAL, MAVLINK_MESSAGE_INFO_RALLY_POINT, MAVLINK_MESSAGE_INFO_RALLY_FETCH_POINT, MAVLINK_MESSAGE_INFO_COMPASSMOT_STATUS, MAVLINK_MESSAGE_INFO_AHRS2, MAVLINK_MESSAGE_INFO_CAMERA_STATUS, MAVLINK_MESSAGE_INFO_CAMERA_FEEDBACK, MAVLINK_MESSAGE_INFO_BATTERY2, MAVLINK_MESSAGE_INFO_AHRS3, MAVLINK_MESSAGE_INFO_AUTOPILOT_VERSION_REQUEST, MAVLINK_MESSAGE_INFO_REMOTE_LOG_DATA_BLOCK, MAVLINK_MESSAGE_INFO_REMOTE_LOG_BLOCK_STATUS, MAVLINK_MESSAGE_INFO_LED_CONTROL, MAVLINK_MESSAGE_INFO_MAG_CAL_PROGRESS, MAVLINK_MESSAGE_INFO_MAG_CAL_REPORT, MAVLINK_MESSAGE_INFO_EKF_STATUS_REPORT, MAVLINK_MESSAGE_INFO_PID_TUNING, MAVLINK_MESSAGE_INFO_DEEPSTALL, MAVLINK_MESSAGE_INFO_GIMBAL_REPORT, MAVLINK_MESSAGE_INFO_GIMBAL_CONTROL, MAVLINK_MESSAGE_INFO_GIMBAL_TORQUE_CMD_REPORT, MAVLINK_MESSAGE_INFO_GOPRO_HEARTBEAT, MAVLINK_MESSAGE_INFO_GOPRO_GET_REQUEST, MAVLINK_MESSAGE_INFO_GOPRO_GET_RESPONSE, MAVLINK_MESSAGE_INFO_GOPRO_SET_REQUEST, MAVLINK_MESSAGE_INFO_GOPRO_SET_RESPONSE, MAVLINK_MESSAGE_INFO_EFI_STATUS, MAVLINK_MESSAGE_INFO_RPM, MAVLINK_MESSAGE_INFO_ESTIMATOR_STATUS, MAVLINK_MESSAGE_INFO_WIND_COV, MAVLINK_MESSAGE_INFO_GPS_INPUT, MAVLINK_MESSAGE_INFO_GPS_RTCM_DATA, MAVLINK_MESSAGE_INFO_HIGH_LATENCY, MAVLINK_MESSAGE_INFO_HIGH_LATENCY2, MAVLINK_MESSAGE_INFO_VIBRATION, MAVLINK_MESSAGE_INFO_HOME_POSITION, MAVLINK_MESSAGE_INFO_SET_HOME_POSITION, MAVLINK_MESSAGE_INFO_MESSAGE_INTERVAL, MAVLINK_MESSAGE_INFO_EXTENDED_SYS_STATE, MAVLINK_MESSAGE_INFO_ADSB_VEHICLE, MAVLINK_MESSAGE_INFO_COLLISION, MAVLINK_MESSAGE_INFO_V2_EXTENSION, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, MAVLINK_MESSAGE_INFO_SETUP_SIGNING, MAVLINK_MESSAGE_INFO_BUTTON_CHANGE, MAVLINK_MESSAGE_INFO_PLAY_TUNE, MAVLINK_MESSAGE_INFO_CAMERA_INFORMATION, MAVLINK_MESSAGE_INFO_CAMERA_SETTINGS, MAVLINK_MESSAGE_INFO_STORAGE_INFORMATION, MAVLINK_MESSAGE_INFO_CAMERA_CAPTURE_STATUS, MAVLINK_MESSAGE_INFO_CAMERA_IMAGE_CAPTURED, MAVLINK_MESSAGE_INFO_FLIGHT_INFORMATION, MAVLINK_MESSAGE_INFO_MOUNT_ORIENTATION, MAVLINK_MESSAGE_INFO_LOGGING_DATA, MAVLINK_MESSAGE_INFO_LOGGING_DATA_ACKED, MAVLINK_MESSAGE_INFO_LOGGING_ACK, MAVLINK_MESSAGE_INFO_VIDEO_STREAM_INFORMATION, MAVLINK_MESSAGE_INFO_VIDEO_STREAM_STATUS, MAVLINK_MESSAGE_INFO_CAMERA_FOV_STATUS, MAVLINK_MESSAGE_INFO_CAMERA_TRACKING_IMAGE_STATUS, MAVLINK_MESSAGE_INFO_CAMERA_TRACKING_GEO_STATUS, MAVLINK_MESSAGE_INFO_CAMERA_THERMAL_RANGE, MAVLINK_MESSAGE_INFO_GIMBAL_MANAGER_INFORMATION, MAVLINK_MESSAGE_INFO_GIMBAL_MANAGER_STATUS, MAVLINK_MESSAGE_INFO_GIMBAL_MANAGER_SET_ATTITUDE, MAVLINK_MESSAGE_INFO_GIMBAL_DEVICE_INFORMATION, MAVLINK_MESSAGE_INFO_GIMBAL_DEVICE_SET_ATTITUDE, MAVLINK_MESSAGE_INFO_GIMBAL_DEVICE_ATTITUDE_STATUS, MAVLINK_MESSAGE_INFO_AUTOPILOT_STATE_FOR_GIMBAL_DEVICE, MAVLINK_MESSAGE_INFO_GIMBAL_MANAGER_SET_PITCHYAW, MAVLINK_MESSAGE_INFO_GIMBAL_MANAGER_SET_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_WIFI_CONFIG_AP, MAVLINK_MESSAGE_INFO_AIS_VESSEL, MAVLINK_MESSAGE_INFO_UAVCAN_NODE_STATUS, MAVLINK_MESSAGE_INFO_UAVCAN_NODE_INFO, MAVLINK_MESSAGE_INFO_PARAM_EXT_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_EXT_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_EXT_VALUE, MAVLINK_MESSAGE_INFO_PARAM_EXT_SET, MAVLINK_MESSAGE_INFO_PARAM_EXT_ACK, MAVLINK_MESSAGE_INFO_OBSTACLE_DISTANCE, MAVLINK_MESSAGE_INFO_ODOMETRY, MAVLINK_MESSAGE_INFO_TRAJECTORY_REPRESENTATION_WAYPOINTS, MAVLINK_MESSAGE_INFO_TRAJECTORY_REPRESENTATION_BEZIER, MAVLINK_MESSAGE_INFO_ISBD_LINK_STATUS, MAVLINK_MESSAGE_INFO_RAW_RPM, MAVLINK_MESSAGE_INFO_UTM_GLOBAL_POSITION, MAVLINK_MESSAGE_INFO_DEBUG_FLOAT_ARRAY, MAVLINK_MESSAGE_INFO_SMART_BATTERY_INFO, MAVLINK_MESSAGE_INFO_GENERATOR_STATUS, MAVLINK_MESSAGE_INFO_ACTUATOR_OUTPUT_STATUS, MAVLINK_MESSAGE_INFO_RELAY_STATUS, MAVLINK_MESSAGE_INFO_TUNNEL, MAVLINK_MESSAGE_INFO_CAN_FRAME, MAVLINK_MESSAGE_INFO_CANFD_FRAME, MAVLINK_MESSAGE_INFO_CAN_FILTER_MODIFY, MAVLINK_MESSAGE_INFO_WHEEL_DISTANCE, MAVLINK_MESSAGE_INFO_WINCH_STATUS, MAVLINK_MESSAGE_INFO_UAVIONIX_ADSB_OUT_CFG, MAVLINK_MESSAGE_INFO_UAVIONIX_ADSB_OUT_DYNAMIC, MAVLINK_MESSAGE_INFO_UAVIONIX_ADSB_TRANSCEIVER_HEALTH_REPORT, MAVLINK_MESSAGE_INFO_UAVIONIX_ADSB_OUT_CFG_REGISTRATION, MAVLINK_MESSAGE_INFO_UAVIONIX_ADSB_OUT_CFG_FLIGHTID, MAVLINK_MESSAGE_INFO_UAVIONIX_ADSB_GET, MAVLINK_MESSAGE_INFO_UAVIONIX_ADSB_OUT_CONTROL, MAVLINK_MESSAGE_INFO_UAVIONIX_ADSB_OUT_STATUS, MAVLINK_MESSAGE_INFO_LOWEHEISER_GOV_EFI, MAVLINK_MESSAGE_INFO_DEVICE_OP_READ, MAVLINK_MESSAGE_INFO_DEVICE_OP_READ_REPLY, MAVLINK_MESSAGE_INFO_DEVICE_OP_WRITE, MAVLINK_MESSAGE_INFO_DEVICE_OP_WRITE_REPLY, MAVLINK_MESSAGE_INFO_SECURE_COMMAND, MAVLINK_MESSAGE_INFO_SECURE_COMMAND_REPLY, MAVLINK_MESSAGE_INFO_ADAP_TUNING, MAVLINK_MESSAGE_INFO_VISION_POSITION_DELTA, MAVLINK_MESSAGE_INFO_AOA_SSA, MAVLINK_MESSAGE_INFO_ESC_TELEMETRY_1_TO_4, MAVLINK_MESSAGE_INFO_ESC_TELEMETRY_5_TO_8, MAVLINK_MESSAGE_INFO_ESC_TELEMETRY_9_TO_12, MAVLINK_MESSAGE_INFO_OSD_PARAM_CONFIG, MAVLINK_MESSAGE_INFO_OSD_PARAM_CONFIG_REPLY, MAVLINK_MESSAGE_INFO_OSD_PARAM_SHOW_CONFIG, MAVLINK_MESSAGE_INFO_OSD_PARAM_SHOW_CONFIG_REPLY, MAVLINK_MESSAGE_INFO_OBSTACLE_DISTANCE_3D, MAVLINK_MESSAGE_INFO_WATER_DEPTH, MAVLINK_MESSAGE_INFO_MCU_STATUS, MAVLINK_MESSAGE_INFO_ESC_TELEMETRY_13_TO_16, MAVLINK_MESSAGE_INFO_ESC_TELEMETRY_17_TO_20, MAVLINK_MESSAGE_INFO_ESC_TELEMETRY_21_TO_24, MAVLINK_MESSAGE_INFO_ESC_TELEMETRY_25_TO_28, MAVLINK_MESSAGE_INFO_ESC_TELEMETRY_29_TO_32, MAVLINK_MESSAGE_INFO_OPEN_DRONE_ID_BASIC_ID, MAVLINK_MESSAGE_INFO_OPEN_DRONE_ID_LOCATION, MAVLINK_MESSAGE_INFO_OPEN_DRONE_ID_AUTHENTICATION, MAVLINK_MESSAGE_INFO_OPEN_DRONE_ID_SELF_ID, MAVLINK_MESSAGE_INFO_OPEN_DRONE_ID_SYSTEM, MAVLINK_MESSAGE_INFO_OPEN_DRONE_ID_OPERATOR_ID, MAVLINK_MESSAGE_INFO_OPEN_DRONE_ID_MESSAGE_PACK, MAVLINK_MESSAGE_INFO_OPEN_DRONE_ID_ARM_STATUS, MAVLINK_MESSAGE_INFO_OPEN_DRONE_ID_SYSTEM_UPDATE, MAVLINK_MESSAGE_INFO_HYGROMETER_SENSOR, MAVLINK_MESSAGE_INFO_ICAROUS_HEARTBEAT, MAVLINK_MESSAGE_INFO_ICAROUS_KINEMATIC_BANDS, MAVLINK_MESSAGE_INFO_CUBEPILOT_RAW_RC, MAVLINK_MESSAGE_INFO_HERELINK_VIDEO_STREAM_INFORMATION, MAVLINK_MESSAGE_INFO_HERELINK_TELEM, MAVLINK_MESSAGE_INFO_CUBEPILOT_FIRMWARE_UPDATE_START, MAVLINK_MESSAGE_INFO_CUBEPILOT_FIRMWARE_UPDATE_RESP, MAVLINK_MESSAGE_INFO_AIRLINK_AUTH, MAVLINK_MESSAGE_INFO_AIRLINK_AUTH_RESPONSE}
# define MAVLINK_MESSAGE_NAMES {{ "ACTUATOR_CONTROL_TARGET", 140 }, { "ACTUATOR_OUTPUT_STATUS", 375 }, { "ADAP_TUNING", 11010 }, { "ADSB_VEHICLE", 246 }, { "AHRS", 163 }, { "AHRS2", 178 }, { "AHRS3", 182 }, { "AIRLINK_AUTH", 52000 }, { "AIRLINK_AUTH_RESPONSE", 52001 }, { "AIRSPEED_AUTOCAL", 174 }, { "AIS_VESSEL", 301 }, { "ALTITUDE", 141 }, { "AOA_SSA", 11020 }, { "AP_ADC", 153 }, { "ATTITUDE", 30 }, { "ATTITUDE_QUATERNION", 31 }, { "ATTITUDE_QUATERNION_COV", 61 }, { "ATTITUDE_TARGET", 83 }, { "ATT_POS_MOCAP", 138 }, { "AUTH_KEY", 7 }, { "AUTOPILOT_STATE_FOR_GIMBAL_DEVICE", 286 }, { "AUTOPILOT_VERSION", 148 }, { "AUTOPILOT_VERSION_REQUEST", 183 }, { "BATTERY2", 181 }, { "BATTERY_STATUS", 147 }, { "BUTTON_CHANGE", 257 }, { "CAMERA_CAPTURE_STATUS", 262 }, { "CAMERA_FEEDBACK", 180 }, { "CAMERA_FOV_STATUS", 271 }, { "CAMERA_IMAGE_CAPTURED", 263 }, { "CAMERA_INFORMATION", 259 }, { "CAMERA_SETTINGS", 260 }, { "CAMERA_STATUS", 179 }, { "CAMERA_THERMAL_RANGE", 277 }, { "CAMERA_TRACKING_GEO_STATUS", 276 }, { "CAMERA_TRACKING_IMAGE_STATUS", 275 }, { "CAMERA_TRIGGER", 112 }, { "CANFD_FRAME", 387 }, { "CAN_FILTER_MODIFY", 388 }, { "CAN_FRAME", 386 }, { "CHANGE_OPERATOR_CONTROL", 5 }, { "CHANGE_OPERATOR_CONTROL_ACK", 6 }, { "COLLISION", 247 }, { "COMMAND_ACK", 77 }, { "COMMAND_INT", 75 }, { "COMMAND_LONG", 76 }, { "COMPASSMOT_STATUS", 177 }, { "CONTROL_SYSTEM_STATE", 146 }, { "CUBEPILOT_FIRMWARE_UPDATE_RESP", 50005 }, { "CUBEPILOT_FIRMWARE_UPDATE_START", 50004 }, { "CUBEPILOT_RAW_RC", 50001 }, { "DATA16", 169 }, { "DATA32", 170 }, { "DATA64", 171 }, { "DATA96", 172 }, { "DATA_STREAM", 67 }, { "DATA_TRANSMISSION_HANDSHAKE", 130 }, { "DEBUG", 254 }, { "DEBUG_FLOAT_ARRAY", 350 }, { "DEBUG_VECT", 250 }, { "DEEPSTALL", 195 }, { "DEVICE_OP_READ", 11000 }, { "DEVICE_OP_READ_REPLY", 11001 }, { "DEVICE_OP_WRITE", 11002 }, { "DEVICE_OP_WRITE_REPLY", 11003 }, { "DIGICAM_CONFIGURE", 154 }, { "DIGICAM_CONTROL", 155 }, { "DISTANCE_SENSOR", 132 }, { "EFI_STATUS", 225 }, { "EKF_STATUS_REPORT", 193 }, { "ENCAPSULATED_DATA", 131 }, { "ESC_TELEMETRY_13_TO_16", 11040 }, { "ESC_TELEMETRY_17_TO_20", 11041 }, { "ESC_TELEMETRY_1_TO_4", 11030 }, { "ESC_TELEMETRY_21_TO_24", 11042 }, { "ESC_TELEMETRY_25_TO_28", 11043 }, { "ESC_TELEMETRY_29_TO_32", 11044 }, { "ESC_TELEMETRY_5_TO_8", 11031 }, { "ESC_TELEMETRY_9_TO_12", 11032 }, { "ESTIMATOR_STATUS", 230 }, { "EXTENDED_SYS_STATE", 245 }, { "FENCE_FETCH_POINT", 161 }, { "FENCE_POINT", 160 }, { "FENCE_STATUS", 162 }, { "FILE_TRANSFER_PROTOCOL", 110 }, { "FLIGHT_INFORMATION", 264 }, { "FOLLOW_TARGET", 144 }, { "GENERATOR_STATUS", 373 }, { "GIMBAL_CONTROL", 201 }, { "GIMBAL_DEVICE_ATTITUDE_STATUS", 285 }, { "GIMBAL_DEVICE_INFORMATION", 283 }, { "GIMBAL_DEVICE_SET_ATTITUDE", 284 }, { "GIMBAL_MANAGER_INFORMATION", 280 }, { "GIMBAL_MANAGER_SET_ATTITUDE", 282 }, { "GIMBAL_MANAGER_SET_MANUAL_CONTROL", 288 }, { "GIMBAL_MANAGER_SET_PITCHYAW", 287 }, { "GIMBAL_MANAGER_STATUS", 281 }, { "GIMBAL_REPORT", 200 }, { "GIMBAL_TORQUE_CMD_REPORT", 214 }, { "GLOBAL_POSITION_INT", 33 }, { "GLOBAL_POSITION_INT_COV", 63 }, { "GLOBAL_VISION_POSITION_ESTIMATE", 101 }, { "GOPRO_GET_REQUEST", 216 }, { "GOPRO_GET_RESPONSE", 217 }, { "GOPRO_HEARTBEAT", 215 }, { "GOPRO_SET_REQUEST", 218 }, { "GOPRO_SET_RESPONSE", 219 }, { "GPS2_RAW", 124 }, { "GPS2_RTK", 128 }, { "GPS_GLOBAL_ORIGIN", 49 }, { "GPS_INJECT_DATA", 123 }, { "GPS_INPUT", 232 }, { "GPS_RAW_INT", 24 }, { "GPS_RTCM_DATA", 233 }, { "GPS_RTK", 127 }, { "GPS_STATUS", 25 }, { "HEARTBEAT", 0 }, { "HERELINK_TELEM", 50003 }, { "HERELINK_VIDEO_STREAM_INFORMATION", 50002 }, { "HIGHRES_IMU", 105 }, { "HIGH_LATENCY", 234 }, { "HIGH_LATENCY2", 235 }, { "HIL_ACTUATOR_CONTROLS", 93 }, { "HIL_CONTROLS", 91 }, { "HIL_GPS", 113 }, { "HIL_OPTICAL_FLOW", 114 }, { "HIL_RC_INPUTS_RAW", 92 }, { "HIL_SENSOR", 107 }, { "HIL_STATE", 90 }, { "HIL_STATE_QUATERNION", 115 }, { "HOME_POSITION", 242 }, { "HWSTATUS", 165 }, { "HYGROMETER_SENSOR", 12920 }, { "ICAROUS_HEARTBEAT", 42000 }, { "ICAROUS_KINEMATIC_BANDS", 42001 }, { "ISBD_LINK_STATUS", 335 }, { "LANDING_TARGET", 149 }, { "LED_CONTROL", 186 }, { "LIMITS_STATUS", 167 }, { "LOCAL_POSITION_NED", 32 }, { "LOCAL_POSITION_NED_COV", 64 }, { "LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET", 89 }, { "LOGGING_ACK", 268 }, { "LOGGING_DATA", 266 }, { "LOGGING_DATA_ACKED", 267 }, { "LOG_DATA", 120 }, { "LOG_ENTRY", 118 }, { "LOG_ERASE", 121 }, { "LOG_REQUEST_DATA", 119 }, { "LOG_REQUEST_END", 122 }, { "LOG_REQUEST_LIST", 117 }, { "LOWEHEISER_GOV_EFI", 10151 }, { "MAG_CAL_PROGRESS", 191 }, { "MAG_CAL_REPORT", 192 }, { "MANUAL_CONTROL", 69 }, { "MANUAL_SETPOINT", 81 }, { "MCU_STATUS", 11039 }, { "MEMINFO", 152 }, { "MEMORY_VECT", 249 }, { "MESSAGE_INTERVAL", 244 }, { "MISSION_ACK", 47 }, { "MISSION_CLEAR_ALL", 45 }, { "MISSION_COUNT", 44 }, { "MISSION_CURRENT", 42 }, { "MISSION_ITEM", 39 }, { "MISSION_ITEM_INT", 73 }, { "MISSION_ITEM_REACHED", 46 }, { "MISSION_REQUEST", 40 }, { "MISSION_REQUEST_INT", 51 }, { "MISSION_REQUEST_LIST", 43 }, { "MISSION_REQUEST_PARTIAL_LIST", 37 }, { "MISSION_SET_CURRENT", 41 }, { "MISSION_WRITE_PARTIAL_LIST", 38 }, { "MOUNT_CONFIGURE", 156 }, { "MOUNT_CONTROL", 157 }, { "MOUNT_ORIENTATION", 265 }, { "MOUNT_STATUS", 158 }, { "NAMED_VALUE_FLOAT", 251 }, { "NAMED_VALUE_INT", 252 }, { "NAV_CONTROLLER_OUTPUT", 62 }, { "OBSTACLE_DISTANCE", 330 }, { "OBSTACLE_DISTANCE_3D", 11037 }, { "ODOMETRY", 331 }, { "OPEN_DRONE_ID_ARM_STATUS", 12918 }, { "OPEN_DRONE_ID_AUTHENTICATION", 12902 }, { "OPEN_DRONE_ID_BASIC_ID", 12900 }, { "OPEN_DRONE_ID_LOCATION", 12901 }, { "OPEN_DRONE_ID_MESSAGE_PACK", 12915 }, { "OPEN_DRONE_ID_OPERATOR_ID", 12905 }, { "OPEN_DRONE_ID_SELF_ID", 12903 }, { "OPEN_DRONE_ID_SYSTEM", 12904 }, { "OPEN_DRONE_ID_SYSTEM_UPDATE", 12919 }, { "OPTICAL_FLOW", 100 }, { "OPTICAL_FLOW_RAD", 106 }, { "OSD_PARAM_CONFIG", 11033 }, { "OSD_PARAM_CONFIG_REPLY", 11034 }, { "OSD_PARAM_SHOW_CONFIG", 11035 }, { "OSD_PARAM_SHOW_CONFIG_REPLY", 11036 }, { "PARAM_EXT_ACK", 324 }, { "PARAM_EXT_REQUEST_LIST", 321 }, { "PARAM_EXT_REQUEST_READ", 320 }, { "PARAM_EXT_SET", 323 }, { "PARAM_EXT_VALUE", 322 }, { "PARAM_MAP_RC", 50 }, { "PARAM_REQUEST_LIST", 21 }, { "PARAM_REQUEST_READ", 20 }, { "PARAM_SET", 23 }, { "PARAM_VALUE", 22 }, { "PID_TUNING", 194 }, { "PING", 4 }, { "PLAY_TUNE", 258 }, { "POSITION_TARGET_GLOBAL_INT", 87 }, { "POSITION_TARGET_LOCAL_NED", 85 }, { "POWER_STATUS", 125 }, { "RADIO", 166 }, { "RADIO_STATUS", 109 }, { "RALLY_FETCH_POINT", 176 }, { "RALLY_POINT", 175 }, { "RANGEFINDER", 173 }, { "RAW_IMU", 27 }, { "RAW_PRESSURE", 28 }, { "RAW_RPM", 339 }, { "RC_CHANNELS", 65 }, { "RC_CHANNELS_OVERRIDE", 70 }, { "RC_CHANNELS_RAW", 35 }, { "RC_CHANNELS_SCALED", 34 }, { "RELAY_STATUS", 376 }, { "REMOTE_LOG_BLOCK_STATUS", 185 }, { "REMOTE_LOG_DATA_BLOCK", 184 }, { "REQUEST_DATA_STREAM", 66 }, { "RESOURCE_REQUEST", 142 }, { "RPM", 226 }, { "SAFETY_ALLOWED_AREA", 55 }, { "SAFETY_SET_ALLOWED_AREA", 54 }, { "SCALED_IMU", 26 }, { "SCALED_IMU2", 116 }, { "SCALED_IMU3", 129 }, { "SCALED_PRESSURE", 29 }, { "SCALED_PRESSURE2", 137 }, { "SCALED_PRESSURE3", 143 }, { "SECURE_COMMAND", 11004 }, { "SECURE_COMMAND_REPLY", 11005 }, { "SENSOR_OFFSETS", 150 }, { "SERIAL_CONTROL", 126 }, { "SERVO_OUTPUT_RAW", 36 }, { "SETUP_SIGNING", 256 }, { "SET_ACTUATOR_CONTROL_TARGET", 139 }, { "SET_ATTITUDE_TARGET", 82 }, { "SET_GPS_GLOBAL_ORIGIN", 48 }, { "SET_HOME_POSITION", 243 }, { "SET_MAG_OFFSETS", 151 }, { "SET_MODE", 11 }, { "SET_POSITION_TARGET_GLOBAL_INT", 86 }, { "SET_POSITION_TARGET_LOCAL_NED", 84 }, { "SIMSTATE", 164 }, { "SIM_STATE", 108 }, { "SMART_BATTERY_INFO", 370 }, { "STATUSTEXT", 253 }, { "STORAGE_INFORMATION", 261 }, { "SYSTEM_TIME", 2 }, { "SYS_STATUS", 1 }, { "TERRAIN_CHECK", 135 }, { "TERRAIN_DATA", 134 }, { "TERRAIN_REPORT", 136 }, { "TERRAIN_REQUEST", 133 }, { "TIMESYNC", 111 }, { "TRAJECTORY_REPRESENTATION_BEZIER", 333 }, { "TRAJECTORY_REPRESENTATION_WAYPOINTS", 332 }, { "TUNNEL", 385 }, { "UAVCAN_NODE_INFO", 311 }, { "UAVCAN_NODE_STATUS", 310 }, { "UAVIONIX_ADSB_GET", 10006 }, { "UAVIONIX_ADSB_OUT_CFG", 10001 }, { "UAVIONIX_ADSB_OUT_CFG_FLIGHTID", 10005 }, { "UAVIONIX_ADSB_OUT_CFG_REGISTRATION", 10004 }, { "UAVIONIX_ADSB_OUT_CONTROL", 10007 }, { "UAVIONIX_ADSB_OUT_DYNAMIC", 10002 }, { "UAVIONIX_ADSB_OUT_STATUS", 10008 }, { "UAVIONIX_ADSB_TRANSCEIVER_HEALTH_REPORT", 10003 }, { "UTM_GLOBAL_POSITION", 340 }, { "V2_EXTENSION", 248 }, { "VFR_HUD", 74 }, { "VIBRATION", 241 }, { "VICON_POSITION_ESTIMATE", 104 }, { "VIDEO_STREAM_INFORMATION", 269 }, { "VIDEO_STREAM_STATUS", 270 }, { "VISION_POSITION_DELTA", 11011 }, { "VISION_POSITION_ESTIMATE", 102 }, { "VISION_SPEED_ESTIMATE", 103 }, { "WATER_DEPTH", 11038 }, { "WHEEL_DISTANCE", 9000 }, { "WIFI_CONFIG_AP", 299 }, { "WINCH_STATUS", 9005 }, { "WIND", 168 }, { "WIND_COV", 231 }}
# if MAVLINK_COMMAND_24BIT
#  include "../mavlink_get_info.h"
# endif
#endif

#ifdef __cplusplus
}
#endif // __cplusplus
#endif // MAVLINK_ARDUPILOTMEGA_H
